[Code of Federal Regulations]

[Title 40, Volume 31]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR1039.1]



[Page 476-478]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 1039_CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD 

COMPRESSION-IGNITION ENGINES--Table of Contents

 

                  Subpart A_Overview and Applicability

 

Sec.  1039.1  Does this part apply for my engines?









                  Subpart A_Overview and Applicability



Sec.

1039.1 Does this part apply for my engines?

1039.5 Which engines are excluded from this part's requirements?

1039.10 How is this part organized?

1039.15 Do any other regulation parts apply to me?

1039.20 What requirements from this part apply to excluded stationary 

          engines?



          Subpart B_Emission Standards and Related Requirements



1039.101 What exhaust emission standards must my engines meet after the 

          2014 model year?

1039.102 What exhaust emission standards and phase-in allowances apply 

          for my engines in model year 2014 and earlier?

1039.104 Are there interim provisions that apply only for a limited 

          time?

1039.105 What smoke standards must my engines meet?

1039.107 What evaporative emission standards and requirements apply?

1039.110 [Reserved]

1039.115 What other requirements must my engines meet?

1039.120 What emission-related warranty requirements apply to me?

1039.125 What maintenance instructions must I give to buyers?

1039.130 What installation instructions must I give to equipment 

          manufacturers?

1039.135 How must I label and identify the engines I produce?

1039.140 What is my engine's maximum engine power?



                  Subpart C_Certifying Engine Families



1039.201 What are the general requirements for obtaining a certificate 

          of conformity?

1039.205 What must I include in my application?

1039.210 May I get preliminary approval before I complete my 

          application?

1039.220 How do I amend the maintenance instructions in my application?

1039.225 How do I amend my application for certification to include new 

          or modified engines or to change an FEL?

1039.230 How do I select engine families?

1039.235 What emission testing must I perform for my application for a 

          certificate of conformity?

1039.240 How do I demonstrate that my engine family complies with 

          exhaust emission standards?

1039.245 How do I determine deterioration factors from exhaust 

          durability testing?

1039.250 What records must I keep and what reports must I send to EPA?

1039.255 What decisions may EPA make regarding my certificate of 

          conformity?



Subpart D [Reserved]



                        Subpart E_In-use Testing



1039.401 General provisions.



                        Subpart F_Test Procedures



1039.501 How do I run a valid emission test?

1039.505 How do I test engines using steady-state duty cycles, including 

          ramped-modal testing?

1039.510 Which duty cycles do I use for transient testing?

1039.515 What are the test procedures related to not-to-exceed 

          standards?

1039.520 What testing must I perform to establish deterioration factors?

1039.525 How do I adjust emission levels to account for infrequently 

          regenerating aftertreatment devices?



                 Subpart G_Special Compliance Provisions



1039.601 What compliance provisions apply to these engines?

1039.605 What provisions apply to engines certified under the motor-

          vehicle program?

1039.610 What provisions apply to vehicles certified under the motor-

          vehicle program?

1039.615 What special provisions apply to engines using noncommercial 

          fuels?

1039.620 What are the provisions for exempting engines used solely for 

          competition?

1039.625 What requirements apply under the program for equipment-

          manufacturer flexibility?

1039.626 What special provisions apply to equipment imported under the 

          equipment-manufacturer flexibility program?

1039.627 What are the incentives for equipment manufacturers to use 

          cleaner engines?

1039.630 What are the economic hardship provisions for equipment 

          manufacturers?

1039.635 What are the hardship provisions for engine manufacturers?

1039.640 What special provisions apply to branded engines?



[[Page 477]]



1039.645 What special provisions apply to engines used for 

          transportation refrigeration units?

1039.650 [Reserved]

1039.655 What special provisions apply to engines sold in Guam, American 

          Samoa, or the Commonwealth of the Northern Mariana Islands?

1039.660 What special provisions apply to Independent Commercial 

          Importers?



       Subpart H_Averaging, Banking, and Trading for Certification



1039.701 General provisions.

1039.705 How do I generate and calculate emission credits?

1039.710 How do I average emission credits?

1039.715 How do I bank emission credits?

1039.720 How do I trade emission credits?

1039.725 What must I include in my application for certification?

1039.730 What ABT reports must I send to EPA?

1039.735 What records must I keep?

1039.740 What restrictions apply for using emission credits?

1039.745 What can happen if I do not comply with the provisions of this 

          subpart?



          Subpart I_Definitions and Other Reference Information



1039.801 What definitions apply to this part?

1039.805 What symbols, acronyms, and abbreviations does this part use?

1039.810 What materials does this part reference?

1039.815 What provisions apply to confidential information?

1039.820 How do I request a hearing?



Appendix I to Part 1039 [Reserved]

Appendix II to Part 1039--Steady-state Duty Cycles for Constant-Speed 

          Engines

Appendix III to Part 1039--Steady-state Duty Cycles for Variable-Speed 

          Engines with Maximum Power below 19 kW

Appendix IV to Part 1039--Steady-state Duty Cycles for Variable-Speed 

          Engines with Maximum Power at or above 19 kW

Appendix V to Part 1039 [Reserved]

Appendix VI to Part 1039--Nonroad Compression-ignition Composite 

          Transient Cycle



    Authority: 42 U.S.C. 7401-7671q.



    Source: 69 FR 39213, June 29, 2004, unless otherwise noted.







    (a) The regulations in this part 1039 apply for all new, 

compression-ignition nonroad engines (defined in Sec.  1039.801), except 

as provided in Sec.  1039.5.

    (b) This part 1039 applies as follows:

    (1) This part 1039 applies for all engines subject to the emission 

standards specified in subpart B of this part starting with the model 

years noted in the following table:



     Table 1 of Sec.   1039.1--Part 1039 Applicability by Model Year

------------------------------------------------------------------------

                       Power category                         Model year

------------------------------------------------------------------------

kW < 19....................................................     \1\ 2008

 19 <= kW < 56.............................................     \2\ 2008

56 <= kW < 130.............................................         2012

130 <= kW <= 560...........................................         2011

kW  560.........................................        2011

------------------------------------------------------------------------

\1\ As described in Sec.   1039.102, some engines below 19 kW may not be

  subject to the emission standards in this part until the 2010 model

  year.

\2\ As described in Sec.   1039.102, some engines in the 19-56 kW power

  category may not be subject to the emission standards in this part

  until the 2012 model year.



    (2) If you use the provisions of Sec.  1039.104(a) to certify an 

engine to the emission standards of this part before the model years 

shown in Table 1 of this section, all the requirements of this part 

apply for those engines.

    (3) See 40 CFR part 89 for requirements that apply to engines not 

yet subject to the requirements of this part 1039.

    (4) This part 1039 applies for other compression-ignition engines as 

follows:

    (i) The provisions of paragraph (c) of this section and Sec.  

1039.801 apply for stationary engines beginning January 1, 2006.

    (ii) The provisions of Sec.  1039.620 and Sec.  1039.801 apply for 

engines used solely for competition beginning January 1, 2006.

    (c) The definition of nonroad engine in 40 CFR 1068.30 excludes 

certain engines used in stationary applications. These engines are not 

required to comply with this part, except for the requirements in Sec.  

1039.20. In addition, if these engines are uncertified, the prohibitions 

in 40 CFR 1068.101 restrict their use as nonroad engines.



[[Page 478]]



    (d) In certain cases, the regulations in this part 1039 apply to 

engines at or above 250 kW that would otherwise be covered by 40 CFR 

part 1048. See 40 CFR 1048.620 for provisions related to this allowance.



[69 FR 39213, June 29, 2004, as amended at 70 FR 40462, July 13, 2005]