[Code of Federal Regulations]

[Title 40, Volume 31]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR1048.1]



[Page 549-551]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION 

ENGINES--Table of Contents

 

                  Subpart A_Overview and Applicability

 

Sec.  1048.1  Does this part apply to me?









                  Subpart A_Overview and Applicability



Sec.

1048.1 Does this part apply to me?

1048.5 Which engines are excluded from this part's requirements?

1048.10 How is this part organized?

1048.15 Do any other regulation parts affect me?

1048.20 What requirements from this part apply to excluded stationary 

          engines?



          Subpart B_Emission Standards and Related Requirements



1048.101 What exhaust emission standards must my engines meet?

1048.105 What evaporative emissions standards and requirements apply?

1048.110 How must my engines diagnose malfunctions?

1048.115 What other requirements must my engines meet?

1048.120 What warranty requirements apply to me?

1048.125 What maintenance instructions must I give to buyers?

1048.130 What installation instructions must I give to equipment 

          manufacturers?

1048.135 How must I label and identify the engines I produce?

1048.140 What are the provisions for certifying Blue Sky Series engines?

1048.145 Are there interim provisions that apply only for a limited 

          time?



                  Subpart C_Certifying Engine Families



1048.201 What are the general requirements for obtaining a certificate 

          of conformity?

1048.205 What must I include in my application?

1048.210 May I get preliminary approval before I complete my 

          application?

1048.220 How do I amend the maintenance instructions in my application?

1048.225 How do I amend my application for certification to include new 

          or modified engines?

1048.230 How do I select engine families?

1048.235 What emission testing must I perform for my application for a 

          certificate of conformity?

1048.240 How do I demonstrate that my engine family complies with 

          exhaust emission standards?

1048.245 How do I demonstrate that my engine family complies with 

          evaporative emission standards?

1048.250 What records must I keep and make available to EPA?



[[Page 550]]



1048.255 When may EPA deny, revoke, or void my certificate of 

          conformity?



                Subpart D_Testing Production-line Engines



1048.301 When must I test my production-line engines?

1048.305 How must I prepare and test my production-line engines?

1048.310 How must I select engines for production-line testing?

1048.315 How do I know when my engine family fails the production-line 

          testing requirements?

1048.320 What happens if one of my production-line engines fails to meet 

          emission standards?

1048.325 What happens if an engine family fails the production-line 

          requirements?

1048.330 May I sell engines from an engine family with a suspended 

          certificate of conformity?

1048.335 How do I ask EPA to reinstate my suspended certificate?

1048.340 When may EPA revoke my certificate under this subpart and how 

          may I sell these engines again?

1048.345 What production-line testing records must I send to EPA?

1048.350 What records must I keep?



                    Subpart E_Testing In-use Engines



1048.401 What testing requirements apply to my engines that have gone 

          into service?

1048.405 How does this program work?

1048.410 How must I select, prepare, and test my in-use engines?

1048.415 What happens if in-use engines do not meet requirements?

1048.420 What in-use testing information must I report to EPA?

1048.425 What records must I keep?



                        Subpart F_Test Procedures



1048.501 How do I run a valid emission test?

1048.505 How do I test engines using steady-state duty cycles, including 

          ramped-modal testing?

1048.510 Which duty cycles do I use for transient testing?

1048.515 What are the field-testing procedures?



                     Subpart G_Compliance Provisions



1048.601 What compliance provisions apply to these engines?

1048.605 What provisions apply to engines certified under the motor-

          vehicle program?

1048.610 What provisions apply to vehicles certified under the motor-

          vehicle program?

1048.615 What are the provisions for exempting engines designed for lawn 

          and garden applications?

1048.620 What are the provisions for exempting large engines fueled by 

          natural gas?

1048.625 What special provisions apply to engines using noncommercial 

          fuels?

1048.630 What are the provisions for exempting engines used solely for 

          competition?

1048.635 What special provisions apply to branded engines?



Subpart H [Reserved]



          Subpart I_Definitions and Other Reference Information



1048.801 What definitions apply to this part?

1048.805 What symbols, acronyms, and abbreviations does this part use?

1048.810 What materials does this part reference?

1048.815 What provisions apply to confidential information?

1048.820 How do I request a hearing?



Appendix I to Part 1048--Large Spark-ignition (SI) Transient Cycle for 

          Constant-Speed Engines

Appendix II to Part 1048--Large Spark-ignition (SI) Composite Transient 

          Cycle



    Authority: 42 U.S.C. 7401-7671q.



    Source: 67 FR 68347, Nov. 8, 2002, unless otherwise noted.







    (a) The regulations in this part 1048 apply for all new, spark-

ignition nonroad engines (defined in Sec.  1048.801) with maximum engine 

power above 19 kW, except as provided in Sec.  1048.5.

    (b) This part 1048 applies for engines built on or after January 1, 

2004. You need not follow this part for engines you produce before 

January 1, 2004. See Sec. Sec.  1048.101 through 1048.115, Sec.  

1048.145, and the definition of model year in Sec.  1048.801 for more 

information about the timing of new requirements.

    (c) The definition of nonroad engine in 40 CFR 1068.30 excludes 

certain engines used in stationary applications. These engines are not 

required to comply with this part, except for the requirements in Sec.  

1048.20. In addition, if these engines are uncertified, the prohibitions 

in 40 CFR 1068.101 restrict their use as nonroad engines.

    (d) In certain cases, the regulations in this part 1048 apply to 

engines with maximum engine power at or below 19 kW that would otherwise 

be covered by



[[Page 551]]



40 CFR part 90. See 40 CFR 90.913 for provisions related to this 

allowance.



[70 FR 40465, July 13, 2005]