[Code of Federal Regulations]

[Title 40, Volume 31]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR1051.25]



[Page 615]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 1051_CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES

--Table of Contents

 

                  Subpart A_Overview and Applicability

 

Sec.  1051.25  What requirements apply when installing certified engines 

in recreational vehicles?



    (a) If you manufacture recreational vehicles with engines certified 

under Sec.  1051.20, you need not also certify the vehicle under this 

part. The vehicle must nevertheless meet emission standards with the 

engine installed.

    (b) You must follow the engine manufacturer's emission-related 

installation instructions, as described in Sec.  1051.135 and 40 CFR 

1068.105. For example, you must use a fuel system that meets the 

permeation requirements of this part, consistent with the engine 

manufacturer's instructions.

    (c) If you install the engine in a way that makes the engine's 

emission control information label hard to read during normal engine 

maintenance, you must place a duplicate label on the vehicle, as 

described in 40 CFR 1068.105.