[Code of Federal Regulations]

[Title 40, Volume 31]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR1065.205]



[Page 700-701]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 1065_ENGINE-TESTING PROCEDURES--Table of Contents

 

                    Subpart C_Measurement Instruments

 

Sec.  1065.205  Performance specifications for measurement instruments.



    Your test system as a whole must meet all the applicable 

calibrations, verifications, and test-validation criteria specified in 

subparts D and F of this part or subpart J of this part for using PEMS 

and for performing field testing. We recommend that your instruments 

meet the specifications in Table 1 of this section for all ranges you 

use for testing. We also recommend that you keep any documentation you 

receive from instrument manufacturers showing that your instruments meet 

the specifications in Table 1 of this section.



[[Page 701]]



[GRAPHIC] [TIFF OMITTED] TR13JY05.020



         Measurement of Engine Parameters and Ambient Conditions