[Code of Federal Regulations]

[Title 40, Volume 23]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR158.160]



[Page 93-94]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 158_DATA REQUIREMENTS FOR REGISTRATION--Table of Contents

 

              Subpart C_Product Chemistry Data Requirements

 

Sec.  158.160  Description of materials used to produce the product.



    The following information must be submitted on the materials used to 

produce the product:

    (a) Products not produced by an integrated system. (1) For each 

active ingredient that is derived from an EPA-registered product:

    (i) The name of the EPA-registered product.

    (ii) The EPA registration number of that product.

    (2) For each inert ingredient:

    (i) Each brand name, trade name, or other commercial designation of 

the ingredient.

    (ii) All information that the applicant knows (or that is reasonably 

available to him) concerning the composition (and, if requested by the 

Agency, chemical and physical properties) of the ingredient, including a 

copy of technical specifications, data sheets, or other documents 

describing the ingredient.

    (iii) If requested by the Agency, the name and address of the 

producer of the ingredient or, if that information is not known to the 

applicant, the name and address of the supplier of the ingredient.

    (b) Products produced by an integrated system. (1) The information 

required by paragraph (a)(1) of this section concerning each active 

ingredient that is derived from an EPA-registered product (if any).

    (2) The following information concerning each active ingredient that 

is not derived from an EPA-registered product:

    (i) The name and address of the producer of the ingredient (if 

different from the applicant).

    (ii) Information on each starting material used to produce the 

active ingredient, as follows:

    (A) Each brand name, trade name, or other commercial designation of 

the starting material.

    (B) The name and address of the person who produces the starting 

material or, if that information is not known to the applicant, the name 

and address of



[[Page 94]]



each person who supplies the starting material.

    (C) All information that the applicant knows (or that is reasonably 

available to him) concerning the composition (and if requested by the 

Agency, chemical or physical properties) of the starting material, 

including a copy of all technical specifications, data sheets, or other 

documents describing it.

    (3) The information required by paragraph (a)(2) of this section 

concerning each inert ingredient.

    (c) Additional information. On a case-by-case basis, the Agency may 

require additional information on substances used in the production of 

the product.