[Code of Federal Regulations]

[Title 40, Volume 24]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR194.14]



[Page 44-45]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 194_CRITERIA FOR THE CERTIFICATION AND RE-CERTIFICATION OF THE WASTE 

ISOLATION PILOT PLANT'S COMPLIANCE WITH THE 40 CFR PART 191 DISPOSAL 

REGULATIONS--Table of Contents

 

  Subpart B_Compliance Certification and Re-certification Applications

 

Sec.  194.14  Content of compliance certification application.



    Any compliance application shall include:

    (a) A current description of the natural and engineered features 

that may affect the performance of the disposal system. The description 

of the disposal system shall include, at a minimum, the following 

information:

    (1) The location of the disposal system and the controlled area;

    (2) A description of the geology, geophysics, hydrogeology, 

hydrology, and geochemistry of the disposal system and its vicinity and 

how these conditions are expected to change and interact over the 

regulatory time frame.



[[Page 45]]



Such description shall include, at a minimum:

    (i) Existing fluids and fluid hydraulic potential, including brine 

pockets, in and near the disposal system; and

    (ii) Existing higher permeability anhydrite interbeds located at or 

near the horizon of the waste.

    (3) The presence and characteristics of potential pathways for 

transport of waste from the disposal system to the accessible 

environment including, but not limited to: Existing boreholes, solution 

features, breccia pipes, and other potentially permeable features, such 

as interbeds.

    (4) The projected geophysical, hydrogeologic and geochemical 

conditions of the disposal system due to the presence of waste 

including, but not limited to, the effects of production of heat or 

gases from the waste.

    (b) A description of the design of the disposal system including:

    (1) Information on materials of construction including, but not 

limited to: Geologic media, structural materials, engineered barriers, 

general arrangement, and approximate dimensions; and

    (2) Computer codes and standards that have been applied to the 

design and construction of the disposal system.

    (c) Results of assessments conducted pursuant to this part.

    (d) A description of input parameters associated with assessments 

conducted pursuant to this part and the basis for selecting those input 

parameters.

    (e) Documentation of measures taken to meet the assurance 

requirements of this part.

    (f) A description of waste acceptance criteria and actions taken to 

assure adherence to such criteria.

    (g) A description of background radiation in air, soil and water in 

the vicinity of the disposal system and the procedures employed to 

determine such radiation.

    (h) One or more topographic map(s) of the vicinity of the disposal 

system. The contour interval shall be sufficient to show clearly the 

pattern of surface water flow in the vicinity of the disposal system. 

The map(s) shall include standard map notations and symbols, and, in 

addition, shall show boundaries of the controlled area and the location 

of any active, inactive, and abandoned injection and withdrawal wells in 

the controlled area and in the vicinity of the disposal system.

    (i) A description of past and current climatologic and meteorologic 

conditions in the vicinity of the disposal system and how these 

conditions are expected to change over the regulatory time frame.

    (j) The information required elsewhere in this part or any 

additional information, analyses, tests, or records determined by the 

Administrator or the Administrator's authorized representative to be 

necessary for determining compliance with this part.