[Code of Federal Regulations]

[Title 40, Volume 24]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR211.104]



[Page 172]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 211_PRODUCT NOISE LABELING--Table of Contents

 

                      Subpart A_General Provisions

 

Sec.  211.104  Label content.



    The following data and information must be on the label of all 

products for which regulations have been published under this part:

    (a) The term ``Noise Rating'' if the product produces noise, or the 

term ``Noise Reduction Rating'' if the product reduces noise;

    (b) The acoustic rating descriptor that is determined according to 

procedures specified in the regulations that will be published under 

this part;

    (c) Comparative acoustic rating information, which EPA will specify 

in the regulations published under this part;

    (d) A product manufacturer identification consisting of: (1) The 

Company name, and (2) The City and State of the principal office;

    (e) A product model number or type identification;

    (f) The phrase ``Federal law prohibits removal of this label prior 

to purchase'';

    (g) The U.S. Environmental Protection Agency logo, as shown in 

Figure 1;

    (h) The phrase ``Label Required by U.S. EPA regulation 40 CFR part 

211, subpart ------.''

[GRAPHIC] [TIFF OMITTED] TC01FE92.055