[Code of Federal Regulations]

[Title 40, Volume 24]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR211.105]



[Page 172-173]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 211_PRODUCT NOISE LABELING--Table of Contents

 

                      Subpart A_General Provisions

 

Sec.  211.105  Label format.



    (a) Unless specified otherwise in other regulations published under 

this part, the format of the label must be as shown in Figure 2. The 

label must include all data and information required under Sec.  

211.104.



[[Page 173]]



[GRAPHIC] [TIFF OMITTED] TC01FE92.056



    (b) Unless EPA specifies otherwise in regulations published under 

this part, the required data and information specified in Sec.  211.104 

(a) through (h) must be located in the following areas of the prescribed 

label (see Figure 2 of this section):

    (1) Section 211.104 (a)--Area A.

    (2) Section 211.104 (b)--Area B.

    (3) Section 211.104 (c)--Area C.

    (4) Section 211.104 (d)--Area D.

    (5) Section 211.104 (e)--Area E.

    (6) Section 211.104 (f)--Area F.

    (7) Section 211.104 (g)--Area G.

    (8) Section 211.104 (h)--Area H.