[Code of Federal Regulations] [Title 40, Volume 28] [Revised as of July 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR410.22] [Page 178-179] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 410_TEXTILE MILLS POINT SOURCE CATEGORY--Table of Contents Subpart B_Wool Finishing Subcategory Sec. 410.22 Effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). (a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): ------------------------------------------------------------------------ BPT limitations --------------------------- Average of Pollutant or pollutant property daily values Maximum for for 30 any 1 day consecutive days ------------------------------------------------------------------------ Kg/kkg (or pound per 1,000 lb) of fiber --------------------------- BOD5........................................ 22.4 11.2 COD......................................... 163.0 81.5 TSS......................................... 35.2 17.6 Sulfide..................................... 0.28 0.14 Phenol...................................... 0.14 0.07 Total chromium.............................. 0.14 0.07 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0 at all times. [[Page 179]] (b) Additional allocations equal to the effluent limitations established in paragraph (a) of this section are allowed any existing point source subject to such effluent limitations that finishes wool or blended wool fabrics through ``commission finishing'' as defined in Sec. 410.01.