[Code of Federal Regulations] [Title 40, Volume 28] [Revised as of July 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR411.12] [Page 192] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 411_CEMENT MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart A_Nonleaching Subcategory Sec. 411.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in Sec. Sec. 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): ------------------------------------------------------------------------ Effluent limitations (maximum Effluent characteristic for any 1 day) ------------------------------------------------------------------------ Metric units (kg/kkg of product) --------------------------------- TSS................................... 0.005. Temperature (heat).................... Not to exceed 3 [deg]C rise above inlet temperature. pH.................................... Within the range 6.0 to 9.0. --------------------------------- English units (lb/1,000 lb of product) --------------------------------- TSS................................... 0.005. Temperature (heat).................... Not to exceed 3 [deg]C rise above inlet temperature. pH.................................... Within the range 6.0 to 9.0. ------------------------------------------------------------------------ [39 FR 6591, Feb. 20, 1974, as amended at 60 FR 33950, June 29, 1995] [[Page 193]]