[Code of Federal Regulations]

[Title 40, Volume 28]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR411.17]



[Page 193]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 411_CEMENT MANUFACTURING POINT SOURCE CATEGORY--Table of Contents

 

                    Subpart A_Nonleaching Subcategory

 

Sec.  411.17  Effluent limitations guidelines representing the degree of 

effluent reduction attainable by the application of the best conventional 

pollutant control technology.



    The following limitations establish the quantity or quality of 

pollutants or pollutant properties, controlled by this section, which 

may be discharged by a point source subject to the provisions of this 

subpart after application of the best conventional pollutant control 

technology.



------------------------------------------------------------------------

                                          Effluent limitations (maximum

        Effluent characteristic                  for any 1 day)

------------------------------------------------------------------------

                                        Metric units (kg/kkg of product)

                                       ---------------------------------

TSS...................................  0.005.

pH....................................  Within the range 6.0 to 9.0.

                                       ---------------------------------

                                          English units (lb/1,000 lb of

                                                     product)

                                       ---------------------------------

TSS...................................  0.005.

pH....................................  Within the range 6.0 to 9.0.

------------------------------------------------------------------------





[44 FR 50741, Aug. 29, 1979]