[Code of Federal Regulations]

[Title 40, Volume 28]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR411.23]



[Page 194]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 411_CEMENT MANUFACTURING POINT SOURCE CATEGORY--Table of Contents

 

                     Subpart B_Leaching Subcategory

 

Sec.  411.23  Effluent limitations guidelines representing the degree of 

effluent reduction attainable by the application of the best available 

technology economically achievable.



    The following limitations establish the quantity or quality of 

pollutants or pollutant properties, controlled by this section, which 

may be discharged by a point source subject to the provisions of this 

subpart after application of the best available technology economically 

achievable.



------------------------------------------------------------------------

                                          Effluent limitations (maximum

        Effluent characteristic                  for any 1 day)

------------------------------------------------------------------------

Temperature (heat)....................  Not to exceed 3 [deg]C rise

                                         above inlet temperature.

------------------------------------------------------------------------





[44 FR 50741, Aug. 29, 1979]