[Code of Federal Regulations] [Title 40, Volume 28] [Revised as of July 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR413.01] [Page 205-206] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 413_ELECTROPLATING POINT SOURCE CATEGORY--Table of Contents Sec. 413.01 Applicability and compliance dates. General Provisions Sec. 413.01 Applicability and compliance dates. 413.02 General definitions. 413.03 Monitoring requirements. 413.04 Standards for integrated facilities. Subpart A_Electroplating of Common Metals Subcategory 413.10 Applicability: Description of the electroplating of common metals subcategory. 413.11 Specialized definitions. 413.12-413.13 [Reserved] 413.14 Pretreatment standards for existing sources. Subpart B_Electroplating of Precious Metals Subcategory 413.20 Applicability: Description of the electroplating of precious metals subcategory. 413.21 Specialized definitions. 413.22-413.23 [Reserved] 413.24 Pretreatment standards for existing sources. Subpart C--Electroplating of Specialty Metals Subcategory [Reserved] Subpart D_Anodizing Subcategory 413.40 Applicability: Description of the anodizing subcategory. 413.41 Specialized definitions. 413.42-413.43 [Reserved] 413.44 Pretreatment standards for existing sources. Subpart E_Coatings Subcategory 413.50 Applicability: Description of the coatings subcategory. 413.51 Specialized definitions. 413.52-413.53 [Reserved] 413.54 Pretreatment standards for existing sources. Subpart F_Chemical Etching and Milling Subcategory 413.60 Applicability: Description of the chemical etching and milling subcategory. 413.61 Specialized definitions. 413.62-413.63 [Reserved] 413.64 Pretreatment standards for existing sources. Subpart G_Electroless Plating Subcategory 413.70 Applicability: Description of the electroless plating subcategory. 413.71 Specialized definitions. 413.72-413.73 [Reserved] 413.74 Pretreatment standards for existing sources. Subpart H_Printed Circuit Board Subcategory 413.80 Applicability: Description of the printed circuit board subcategory. 413.81 Specialized definitions. 413.82-413.83 [Reserved] 413.84 Pretreatment standards for existing sources. Authority: Secs. 301, 304(g), 307, 308, 309, 402, 405, 501(a), Clean Water Act, as amended, (33 U.S.C. 1311, 1314(g), 1317, 1318, 1319, 1322, 1325 and 1341(a)). [[Page 206]] Source: 46 FR 9467, Jan. 28, 1981, unless otherwise noted. General Provisions (a) This part shall apply to electroplating operations in which metal is electroplated on any basis material and to related metal finishing operations as set forth in the various subparts, whether such operations are conducted in conjunction with electroplating, independently, or as part of some other operation. The compliance deadline for metals and cyanide at integrated facilities shall be June 30, 1984. The compliance date for metals and cyanide at non-integrated facilities shall be April 27, 1984. Compliance with TTO for all facilities shall be July 15, 1986. These part 413 standards shall not apply to a facility which must comply with all the pollutant limitations listed in Sec. 433.15 (metal finishing PSES). (b) Operations similar to electroplating which are specifically excepted from coverage of this part include: (1) Electrowinning and electrorefining conducted as a part of nonferrous metal smelting and refining (40 CFR part 421); (2) Metal surface preparation and conversion coating conducted as a part of coil coating (40 CFR part 465); (3) Metal surface preparation and immersion plating or electroless plating conducted as a part of porcelain enameling (40 CFR part 466); and (4) Electrodeposition of active electrode materials, electroimpregnation, and electroforming conducted as a part of battery manufacturing (40 CFR part 461). (c) Metallic platemaking and gravure cylinder preparation conducted within or for printing and publishing facilities, and continuous strip electroplating conducted within iron and steel manufacturing facilities which introduce pollutants into a publicly owned treatment works are exempted from the pretreatment standards for existing sources set forth in this part. (Secs. 301, 304, 306, 307, 308, and 501 of the Clean Water Act (the Federal Water Pollution Control Act Amendments of 1972, 33 U.S.C. 1251 et. seq., as amended by the Clean Water Act of 1977, Pub. L. 95-217)) [46 FR 9467, Jan. 28, 1981, as amended at 48 FR 32482, July 15, 1983; 48 FR 41410, Sept. 15, 1983; 51 FR 40421, Nov. 7, 1986]