[Code of Federal Regulations]

[Title 40, Volume 28]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR413.41]



[Page 212]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 413_ELECTROPLATING POINT SOURCE CATEGORY--Table of Contents

 

                     Subpart D_Anodizing Subcategory

 

Sec.  413.41  Specialized definitions.



    For the purpose of this subpart:

    (a) The term sq m (``sq ft'') shall mean the area plated expressed 

in square meters (square feet).

    (b) The term operation shall mean any step in the anodizing process 

in which a metal is cleaned, anodized, or colored when each such step is 

followed by a rinse.