[Code of Federal Regulations] [Title 40, Volume 28] [Revised as of July 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR415.62] [Page 255-256] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 415_INORGANIC CHEMICALS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart F_Chlor-alkali Subcategory (Chlorine and Sodium or Potassium Hydroxide Production) Sec. 415.62 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT). (a) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart and using the mercury cell process must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): Subpart F--Chlor-Alkali Mercury Cells ------------------------------------------------------------------------ BPT limitations --------------------------- Average of Pollutant or pollutant property daily values Maximum for for 30 any 1 day consecutive days ------------------------------------------------------------------------ Kg/kkg (or pounds per 1,000 lb) of product --------------------------- TSS......................................... 0.64 0.32 Mercury (T)................................. .00028 .00014 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 6.0 to 9.0. (b) Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart and using the diaphragm cell process must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): [[Page 256]] Subpart F--Chlor-Alkali Diaphragm Cells ------------------------------------------------------------------------ BPT limitations --------------------------- Average of Pollutant or pollutant property daily values Maximum for for 30 any 1 day consecutive days ------------------------------------------------------------------------ Kg/kkg (or pounds per/ 1,000 lb) of product --------------------------- TSS......................................... 1.1 0.51 Copper (T).................................. 0.018 0.0070 Lead (T).................................... 0.026 0.010 Nickel (T).................................. 0.014 0.0056 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0.