[Code of Federal Regulations]

[Title 40, Volume 28]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR420.23]



[Page 398-399]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 420_IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY--Table of 

Contents

 

                     Subpart B_Sintering Subcategory

 

Sec.  420.23  Effluent limitations guidelines representing the degree of 

effluent reduction attainable by the application of the best available 

technology economically achievable (BAT).



    Except as provided in 40 CFR 125.30 through 125.32, any existing 

point source subject to this subpart must achieve the following effluent 

limitations representing the degree of effluent reduction attainable by 

the application of the best available control technology economically 

achievable (BAT).

    (a) Sintering operations with wet air pollution control system. The 

following table presents BAT limitations for sintering operations with 

wet air pollution control systems:



                  Subpart B--Effluent Limitations (BAT)

------------------------------------------------------------------------

                                                               Maximum

             Regulated parameter                  Maximum      monthly

                                                 daily \1\     avg. \1\

------------------------------------------------------------------------

Ammonia-N \2\................................     0.0150      0.00501

Cyanide \2\..................................     0.00300     0.00150

Lead.........................................     0.000451    0.000150

Phenols (4AAP) \2\...........................     0.000100    0.0000501

2,3,7,8-TCDF.................................