[Code of Federal Regulations]

[Title 40, Volume 28]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR420.25]



[Page 399]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 420_IRON AND STEEL MANUFACTURING POINT SOURCE CATEGORY--Table of 

Contents

 

                     Subpart B_Sintering Subcategory

 

Sec.  420.25  Pretreatment standards for existing sources (PSES).



    Except as provided in 40 CFR 403.7 and 403.13, any existing source 

subject to this subpart that introduces pollutants into a publicly owned 

treatment works must comply with 40 CFR part 403 and must achieve the 

following pretreatment standards for existing sources (PSES):

    (a) Sintering operations with wet air pollution control system. The 

following table presents PSES for sintering operations with wet air 

pollution control systems:



      Subpart B--Pretreatment Standards for Existing Sources (PSES)

------------------------------------------------------------------------

                                                               Maximum

             Regulated parameter                  Maximum      monthly

                                                 daily \1\     avg. \1\

------------------------------------------------------------------------

Ammonia-N \2,3\..............................     0.0150      0.00501

Cyanide \2\..................................     0.00300     0.00150

Phenols (4AAP) \2\...........................     0.000100    0.0000501

Lead.........................................     0.000451    0.000150

Zinc.........................................     0.000676    0.000225

2,3,7,8-TCDF.................................