[Code of Federal Regulations] [Title 40, Volume 12] [Revised as of July 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR63.1440] [Page 5-27] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 63_NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES--Table of Contents Subpart QQQ_National Emission Standards for Hazardous Air Pollutants for Primary Copper Smelting Sec. 63.1440 What is the purpose of this subpart? Subpart QQQ_National Emission Standards for Hazardous Air Pollutants for Primary Copper Smelting What This Subpart Covers Sec. 63.1440 What is the purpose of this subpart? 63.1441 Am I subject to this subpart? 63.1442 What parts of my plant does this subpart cover? 63.1443 When do I have to comply with this subpart? Emission Limitations and Work Practice Standards 63.1444 What emissions limitations and work practice standards must I meet for my copper concentrate dryers, smelting furnaces, slag cleaning vessels, and copper converter departments? 63.1445 What work practice standards must I meet for my fugitive dust sources? 63.1446 What alternative emission limitation may I meet for my combined gas streams? Operation and Maintenance Requirements 63.1447 What are my operation and maintenance requirements? General Compliance Requirements 63.1448 What are my general requirements for complying with this subpart? Initial Compliance Requirements 63.1449 By what date must I conduct performance tests or other initial compliance demonstrations? 63.1450 What test methods and other procedures must I use to demonstrate initial compliance with the emission limitations? 63.1451 How do I demonstrate initial compliance with the emission limitations, work practice standards, and operation and maintenance requirements that apply to me? Continuous Compliance Requirements 63.1452 What are my monitoring requirements? 63.1453 How do I demonstrate continuous compliance with the emission limitations, work practice standards, and operations and maintenance requirements that apply to me? Notifications, Reports and Records 63.1454 What notifications must I submit and when? 63.1455 What reports must I submit and when? 63.1456 What records must I keep and how long must I keep my records? Other Requirements and Information 63.1457 What part of the General Provisions apply to me? 63.1458 Who implements and enforces this subpart? 63.1459 What definitions apply to this subpart? Table 1 to Subpart QQQ of Part 63--Applicability of General Provisions to Subpart QQQ. Figure 1 to Subpart QQQ of Part 63--Data Summary Sheet for Determination of Average Opacity. Subpart RRR_National Emission Standards for Hazardous Air Pollutants for Secondary Aluminum Production General 63.1500 Applicability. 63.1501 Dates. 63.1502 Incorporation by reference. 63.1503 Definitions. 63.1504 [Reserved] Emission Standards and Operating Requirements 63.1505 Emission standards for affected sources and emission nits. 63.1506 Operating requirements. 63.1507-63.1509 [Reserved] Monitoring and Compliance Provisions 63.1510 Monitoring requirements. 63.1511 Performance test/compliance demonstration general requirements. 63.1512 Performance test/compliance demonstration requirements and procedures. 63.1513 Equations for determining compliance. 63.1514 [Reserved] Notifications, Reports, And Records 63.1515 Notifications. 63.1516 Reports. 63.1517 Records. Other 63.1518 Applicability of general provisions. 63.1519 Implementation and enforcement. [[Page 6]] 63.1520 [Reserved] Table 1 to Subpart RRR of Part 63--Emission Standards for New and Existing Affected Sources Table 2 to Subpart RRR of Part 63--Summary of Operating Requirements for New and Existing Affected Sources and Emission Units Table 3 to Subpart RRR of Part 63mdash;Summary of Monitoring Requirements for New and Existing Affected Sources and Emission Units Appendix A to Subpart RRR of Part 63--General Provisions Applicability to Subpart RRR Subpart SSS [Reserved] Subpart TTT_National Emission Standards for Hazardous Air Pollutants for Primary Lead Smelting 63.1541 Applicability. 63.1542 Definitions. 63.1543 Standards for process and process fugitive sources. 63.1544 Standards for fugitive dust sources. 63.1545 Compliance dates. 63.1546 Test methods. 63.1547 Monitoring requirements. 63.1548 Notification requirements. 63.1549 Recordkeeping and reporting requirements. 63.1550 Implementation and enforcement. Subpart UUU_National Emission Standards for Hazardous Air Pollutants for Petroleum Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery Units What This Subpart Covers 63.1560 What is the purpose of this subpart? 63.1561 Am I subject to this subpart? 63.1562 What parts of my plant are covered by this subpart? 63.1563 When do I have to comply with this subpart? Catalytic Cracking Units, Catalytic Reforming Units, Sulfur Recovery Units, and Bypass Lines 63.1564 What are my requirements for metal HAP emissions from catalytic cracking units? 63.1565 What are my requirements for organic HAP emissions from catalytic cracking units? 63.1566 What are my requirements for organic HAP emissions from catalytic reforming units? 63.1567 What are my requirements for inorganic HAP emissions from catalytic reforming units? 63.1568 What are my requirements for HAP emissions from sulfur recovery units? 63.1569 What are my requirements for HAP emissions from bypass lines? General Compliance Requirements 63.1570 What are my general requirements for complying with this subpart? 63.1571 How and when must I conduct a performance test or other initial compliance demonstration? 63.1572 What are my monitoring installation, operation, and maintenance requirements? 63.1573 What are my monitoring alternatives? Notifications, Reports, and Records 63.1574 What notifications must I submit and when? 63.1575 What reports must I submit and when? 63.1576 What records must I keep, in what form, and for how long? Other Requirements and Information 63.1577 What parts of the General Provisions apply to me? 63.1578 Who implements and enforces this subpart? 63.1579 What definitions apply to this subpart? Table 1 to Subpart UUU of Part 63--Metal HAP Emission Limits for Catalytic Cracking Units Table 2 to Subpart UUU of Part 63--Operating Limits for Metal HAP Emissions from Catalytic Cracking Units Table 3 to Subpart UUU of Part 63--Continuous Monitoring Systems for Metal HAP Emissions from Catalytic Cracking Units Table 4 to Subpart UUU of Part 63--Requirements for Performance Tests for Metal HAP Emissions from Catalytic Cracking Units Not Subject to the New Source Performance Standard (NSPS) for Particulate Matter (PM) Table 5 to Subpart UUU of Part 63--Initial Compliance with Metal HAP Emission Limits for Catalytic Cracking Units Table 6 to Subpart UUU of Part 63--Continuous Compliance with Metal HAP Emission Limits for Catalytic Cracking Units Table 7 to Subpart UUU of Part 63--Continuous Compliance with Operating Limits for Metal HAP Emissions from Catalytic Cracking Units Table 8 to Subpart UUU of Part 63--Organic HAP Emission Limits for Catalytic Cracking Units Table 9 to Subpart UUU of Part 63--Operating Limits for Organic HAP Emissions from Catalytic Cracking Units [[Page 7]] Table 10 to Subpart UUU of Part 63--Continuous Monitoring Systems for Organic HAP Emissions from Catalytic Cracking Units Table 11 to Subpart UUU of Part 63--Requirements for Performance Tests for Organic HAP Emissions from Catalytic Cracking Units Not Subject to the New Source Performance Standard (NSPS) for Carbon Monoxide (CO) Table 12 to Subpart UUU of Part 63--Initial Compliance with Organic HAP Emission Limits for Catalytic Cracking Units Table 13 to Subpart UUU of Part 63--Continuous Compliance with Organic HAP Emission Limits for Catalytic Cracking Units Table 14 to Subpart UUU of Part 63--Continuous Compliance with Operating Limits for Organic HAP Emissions from Catalytic Cracking Units Table 15 to Subpart UUU of Part 63--Organic HAP Emission Limits for Catalytic Reforming Units Table 16 to Subpart UUU of Part 63--Operating Limits for Organic HAP Emissions from Catalytic Reforming Units Table 17 to Subpart UUU of Part 63--Continuous Monitoring Systems for Organic HAP Emissions from Catalytic Reforming Units Table 18 to Subpart UUU of Part 63--Requirements for Performance Tests for Organic HAP Emissions from Catalytic Reforming Units Table 19 to Subpart UUU of Part 63--Initial Compliance with Organic HAP Emission Limits for Catalytic Reforming Units Table 20 to Subpart UUU of Part 63--Continuous Compliance with Organic HAP Emission Limits for Catalytic Reforming Units Table 21 to Subpart UUU of Part 63--Continuous Compliance with Operating Limits for Organic HAP Emissions from Catalytic Reforming Units Table 22 to Subpart UUU of Part 63--Inorganic HAP Emission Limits for Catalytic Reforming Units Table 23 to Subpart UUU of Part 63--Operating Limits for Inorganic HAP Emission Limitations for Catalytic Reforming Units Table 24 to Subpart UUU of Part 63--Continuous Monitoring Systems for Inorganic HAP Emissions from Catalytic Reforming Units Table 25 to Subpart UUU of Part 63--Requirements for Performance Tests for Inorganic HAP Emissions from Catalytic Reforming Units Table 26 to Subpart UUU of Part 63--Initial Compliance with Inorganic HAP Emission Limits for Catalytic Reforming Units Table 27 to Subpart UUU of Part 63--Continuous Compliance with Inorganic HAP Emission Limits for Catalytic Reforming Units Table 28 to Subpart UUU of Part 63--Continuous Compliance with Operating Limits for Inorganic HAP Emissions from Catalytic Reforming Units Table 29 to Subpart UUU of Part 63--HAP Emission Limits for Sulfur Recovery Units Table 30 to Subpart UUU of Part 63--Operating Limits for HAP Emissions from Sulfur Recovery Units Table 31 to Subpart UUU of Part 63--Continuous Monitoring Systems for HAP Emissions from Sulfur Recovery Units Table 32 to Subpart UUU of Part 63--Requirements for Performance Tests for HAP Emissions from Sulfur Recovery Units Not Subject to the New Source Performance Standards (NSPS) for Sulfur Oxides Table 33 to Subpart UUU of Part 63--Initial Compliance with HAP Emission Limits for Sulfur Recovery Units Table 34 to Subpart UUU of Part 63--Continuous Compliance with HAP Emission Limits for Sulfur Recovery Units Table 35 to Subpart UUU of Part 63--Continuous Compliance with Operating Limits for HAP Emissions from Sulfur Recovery Units Table 36 to Subpart UUU of Part 63--Work Practice Standards for HAP Emissions from Bypass Lines Table 37 to Subpart UUU of Part 63--Requirements for Performance Tests for Bypass Lines Table 38 to Subpart UUU of Part 63--Initial Compliance with Work Practice Standards for HAP Emissions from Bypass Lines Table 39 to Subpart UUU of Part 63--Continuous Compliance with Work Practice Standards for HAP Emissions from Bypass Lines Table 40 to Subpart UUU of Part 63--Requirements for Installation, Operation, and Maintenance of Continuous Opacity Monitoring Systems and Continuous Emission Monitoring Systems Table 41 to Subpart UUU of Part 63--Requirements for Installation, Operation, and Maintenance of Continuous Parameter Monitoring Systems Table 42 to Subpart UUU of Part 63--Additional Information for Initial Notification of Compliance Status Table 43 to Subpart UUU of Part 63--Requirements for Reports Table 44 to Subpart UUU of Part 63--Applicability of NESHAP General Provisions to Subpart UUU [[Page 8]] Appendix A to Subpart UUU of Part 63--Determination of Metal Concentration on Catalyst Particles (Instrumental Analyzer Procedure) Subpart VVV_National Emission Standards for Hazardous Air Pollutants: Publicly Owned Treatment Works Applicability 63.1580 Am I subject to this subpart? 63.1581 Does the subpart distinguish between different types of POTW treatment plants? Industrial POTW Treatment Plant Description and Requirements 63.1582 What are the characteristics of an industrial POTW treatment plant? 63.1583 What are the emission points and control requirements for an industrial POTW treatment plant? 63.1584 When do I have to comply? 63.1585 How does an industrial POTW treatment plant demonstrate compliance? Non-industrial POTW Treatment Plant Requirements 63.1586 What are the emission points and control requirements for a non- industrial POTW treatment plant? 63.1587 When do I have to comply? 63.1588 What inspections must I conduct? 63.1589 What records must I keep? 63.1590 What reports must I submit? General Requirements 63.1591 What are my notification requirements? 63.1592 Which General Provisions apply to my POTW treatment plant? 63.1593 How will the EPA determine if I am in compliance with this subpart? 63.1594 Who enforces this subpart? 63.1595 List of definitions. Table 1 to Subpart VVV of Part 63--Applicability of 40 CFR Part 63 General Provisions to Subpart VVV Subpart WWW [Reserved] Subpart XXX_National Emission Standards for Hazardous Air Pollutants for Ferroalloys Production: Ferromanganese and Silicomanganese 63.1620-63.1649 [Reserved] 63.1650 Applicability and compliance dates. 63.1651 Definitions. 63.1652 Emission standards. 63.1653 Opacity standards. 63.1654 Operational and work practice standards. 63.1655 Maintenance requirements. 63.1656 Performance testing, test methods, and compliance demonstrations. 63.1657 Monitoring requirements. 63.1658 Notification requirements. 63.1659 Reporting requirements. 63.1660 Recordkeeping requirements. 63.1661 Implementation and enforcement. 63.1662-63.1679 [Reserved] Subpart AAAA_National Emission Standards for Hazardous Air Pollutants: Municipal Solid Waste Landfills What This Subpart Covers 63.1930 What is the purpose of this subpart? 63.1935 Am I subject to this subpart? 63.1940 What is the affected source of this subpart? 63.1945 When do I have to comply with this subpart? 63.1947 When do I have to comply with this subpart if I own or operate a bioreactor? 63.1950 When am I no longer required to comply with this subpart? 63.1952 When am I no longer required to comply with the requirements of this subpart if I own or operate a bioreactor? Standards 63.1955 What requirements must I meet? General and Continuing Compliance Requirements 63.1960 How is compliance determined? 63.1965 What is a deviation? 63.1975 How do I calculate the 3-hour block average used to demonstrate compliance? Notifications, Reports and Records 63.1980 What records and reports must I keep and submit? Other Requirements and Information 63.1985 Who enforces this subpart? 63.1990 What definitions apply to this subpart? Table 1 of Subpart AAAA of Part 63--Applicability of NESHAP General Provisions to Subpart AAAA Subpart CCCC_National Emission Standards for Hazardous Air Pollutants: Manufacturing of Nutritional Yeast What This Subpart Covers 63.2130 What is the purpose of this subpart? 63.2131 Am I subject to this subpart? 63.2132 What parts of my plant does this subpart cover? 63.2133 When do I have to comply with this subpart? [[Page 9]] Emission Limitations 63.2140 What emission limitations must I meet? General Compliance Requirements 63.2150 What are my general requirements for complying with this subpart? Testing and Initial Compliance Requirements 63.2160 By what date must I conduct an initial compliance demonstration? 63.2161 What performance tests and other procedures must I use if I monitor brew ethanol? 63.2162 When must I conduct subsequent performance tests? 63.2163 If I monitor fermenter exhaust, what are my monitoring installation, operation, and maintenance requirements? 63.2164 If I monitor brew ethanol, what are my monitoring installation, operation, and maintenance requirements? 63.2165 How do I demonstrate initial compliance with the emission limitations if I monitor fermenter exhaust? 63.2166 How do I demonstrate initial compliance with the emission limitations if I monitor brew ethanol? Continuous Compliance Requirements 63.2170 How do I monitor and collect data to demonstrate continuous compliance? 63.2171 How do I demonstrate continuous compliance with the emission limitations? Notifications, Reports, And Records 63.2180 What notifications must I submit and when? 63.2181 What reports must I submit and when? 63.2182 What records must I keep? 63.2183 In what form and how long must I keep my records? Other Requirements And Information 63.2190 What parts of the General Provisions apply to me? 63.2191 Who implements and enforces this subpart? 63.2192 What definitions apply to this subpart? Table 1 to Subpart CCCC of Part 63--Emission Limitations Table 2 to Subpart CCCC of Part 63--Requirements for Performance Tests (Brew Ethanol Monitoring Only) Table 3 to Subpart CCCC of Part 63--Initial Compliance With Emission Limitations Table 4 to Subpart CCCC of Part 63--Continuous Compliance with Emission Limitations Table 5 to Subpart CCCC of Part 63--Requirements for Reports Table 6 to Subpart CCCC of Part 63--Applicability of General Provisions to Subpart CCCC Subpart DDDD_National Emission Standards for Hazardous Air Pollutants: Plywood and Composite Wood Products What This Subpart Covers 63.2230 What is the purpose of this subpart? 63.2231 Does this subpart apply to me? 63.2232 What parts of my plant does this subpart cover? 63.2233 When do I have to comply with this subpart? Compliance Options, Operating Requirements, and Work Practice Requirements 63.2240 What are the compliance options and operating requirements and how must I meet them? 63.2241 What are the work practice requirements and how must I meet them? General Compliance Requirements 63.2250 What are the general requirements? 63.2251 What are the requirements for the routine control device maintenance exemption? 63.2252 What are the requirements for process units that have no control or work practice requirements? Initial Compliance Requirements 63.2260 How do I demonstrate initial compliance with the compliance options, operating requirements, and work practice requirements? 63.2261 By what date must I conduct performance tests or other initial compliance demonstrations? 63.2262 How do I conduct performance tests and establish operating requirements? 63.2263 Initial compliance demonstration for a dry rotary dryer. 63.2264 Initial compliance demonstration for a hardwood veneer dryer. 63.2265 Initial compliance demonstration for a softwood veneer dryer. 63.2266 Initial compliance demonstration for a veneer redryer. 63.2267 Initial compliance demonstration for a reconstituted wood product press or board cooler. 63.2268 Initial compliance demonstration for a wet control device. 63.2269 What are my monitoring installation, operation, and maintenance requirements? [[Page 10]] Continuous Compliance Requirements 63.2270 How do I monitor and collect data to demonstrate continuous compliance? 63.2271 How do I demonstrate continuous compliance with the compliance options, operating requirements, and work practice requirements? Notifications, Reports, and Records 63.2280 What notifications must I submit and when? 63.2281 What reports must I submit and when? 63.2282 What records must I keep? 63.2283 In what form and how long must I keep my records? Other Requirements and Information 63.2290 What parts of the General Provisions apply to me? 63.2291 Who implements and enforces this subpart? 63.2292 What definitions apply to this subpart? Table 1A to Subpart DDDD of Part 63--Production-Based Compliance Options Table 1B to Subpart DDDD of Part 63--Add-On Control Systems Compliance Options Table 2 to Subpart DDDD of Part 63--Operating Requirements Table 3 to Subpart DDDD of Part 63--Work Practice Requirements Table 4 to Subpart DDDD of Part 63--Requirements for Performance Tests Table 5 to Subpart DDDD of Part 63--Performance Testing and Initial Compliance Demonstrations for the Compliance Options and Operating Requirements Table 6 to Subpart DDDD of Part 63--Initial Compliance Demonstrations for Work Practice Requirements Table 7 to Subpart DDDD of Part 63--Continuous Compliance With the Compliance Options and Operating Requirements Table 8 to Subpart DDDD of Part 63--Continuous Compliance With the Work Practice Requirements Table 9 to Subpart DDDD of Part 63--Requirements for Reports Table 10 to Subpart DDDD of Part 63--Applicability of General Provisions to Subpart DDDD Appendix A to Subpart DDDD of Part 63--Alternative Procedure To Determine Capture Efficiency From Enclosures Around Hot Presses in the Plywood and Composite Wood Products Industry Using Sulfur Hexafluoride Tracer Gas Appendix B to Subpart DDDD of Part 63--Methodology and Criteria for Demonstrating That An Affected Source is Part of the Low-risk Subcategory of Plywood and Composite Wood Products Manufacturing Affected Sources Appendix C to Subpart DDDD of Part 63--Considerations for a Small-Scale Kiln Emission Testing Program Subpart EEEE_National Emission Standards for Hazardous Air Pollutants: Organic Liquids Distribution (Non-Gasoline) What This Subpart Covers 63.2330 What is the purpose of this subpart? 63.2334 Am I subject to this subpart? 63.2338 What parts of my plant does this subpart cover? 63.2342 When do I have to comply with this subpart? Emission Limitations, Operating Limits, and Work Practice Standards 63.2346 What emission limitations, operating limits, and work practice standards must I meet? General Compliance Requirements 63.2350 What are my general requirements for complying with this subpart? Testing and Initial Compliance Requirements 63.2354 What performance tests, design evaluations, and performance evaluations must I conduct? 63.2358 By what date must I conduct performance tests or other initial compliance demonstrations? 63.2362 When must I conduct subsequent performance tests? 63.2366 What are my monitoring installation, operation, and maintenance requirements? 63.2370 How do I demonstrate initial compliance with the emission limitations, operating limits, and work practice standards? Continuous Compliance Requirements 63.2374 When do I monitor and collect data to demonstrate continuous compliance and how do I use the collected data? 63.2378 How do I demonstrate continuous compliance with the emission limitations, operating limits, and work practice standards? Notifications, Reports, and Records 63.2382 What notifications must I submit and when and what information should be submitted? 63.2386 What reports must I submit and when and what information is to be submitted in each? 63.2390 What records must I keep? 63.2394 In what form and how long must I keep my records? [[Page 11]] Other Requirements and Information 63.2396 What compliance options do I have if part of my plant is subject to both this subpart and another subpart? 63.2398 What parts of the General Provisions apply to me? 63.2402 Who implements and enforces this subpart? 63.2406 What definitions apply to this subpart? Table 1 to Subpart EEEE of Part 63--Organic Hazardous Air Pollutants Table 2 to Subpart EEEE of Part 63--Emission Limits Table 3 to Subpart EEEE of Part 63--Operating Limits--High Throughput Transfer Racks Table 4 to Subpart EEEE of Part 63--Work Practice Standards Table 5 to Subpart EEEE of Part 63--Requirements for Performance Tests and Design Evaluations Table 6 to Subpart EEEE of Part 63--Initial Compliance with Emission Limits Table 7 to Subpart EEEE of Part 63--Initial Compliance with Work Practice Standards Table 8 to Subpart EEEE of Part 63--Continuous Compliance with Emission Limits Table 9 to Subpart EEEE of Part 63--Continuous Compliance with Operating Limits--High Throughput Transfer Racks Table 10 to Subpart EEEE of Part 63--Continuous Compliance with Work Practice Standards Table 11 to Subpart EEEE of Part 63--Requirements for Reports Table 12 to Subpart EEEE of Part 63--Applicability of General Provisions to Subpart EEEE Subpart FFFF_National Emission Standards for Hazardous Air Pollutants: Miscellaneous Organic Chemical Manufacturing What This Subpart Covers 63.2430 What is the purpose of this subpart? 63.2435 Am I subject to the requirements in this subpart? 63.2440 What parts of my plant does this subpart cover? Compliance Dates 63.2445 When do I have to comply with this subpart? Emission Limits, Work Practice Standards, and Compliance Requirements 63.2450 What are my general requirements for complying with this subpart? 63.2455 What requirements must I meet for continuous process vents? 63.2460 What requirements must I meet for batch process vents? 63.2465 What requirements must I meet for process vents that emit hydrogen halide and halogen HAP or PM HAP? 63.2470 What requirements must I meet for storage tanks? 63.2475 What requirements must I meet for transfer racks? 63.2480 What requirements must I meet for equipment leaks? 63.2485 What requirements must I meet for wastewater streams and liquid streams in open systems within an MCPU? 63.2490 What requirements must I meet for heat exchange systems? Alternative Means of Compliance 63.2495 How do I comply with the pollution prevention standard? 63.2500 How do I comply with emissions averaging? 63.2505 How do I comply with the alternative standard? Notifications, Reports, and Records 63.2515 What notifications must I submit and when? 63.2520 What reports must I submit and when? 63.2525 What records must I keep? Other Requirements and Information 63.2535 What compliance options do I have if part of my plant is subject to both this subpart and another subpart? 63.2540 What parts of the General Provisions apply to me? 63.2545 Who implements and enforces this subpart? 63.2550 What definitions apply to this subpart? Table 1 to Subpart FFFF of Part 63--Emission Limits and Work Practice Standards for Continuous Process Vents Table 2 to Subpart FFFF of Part 63--Emission Limits and Work Practice Standards for Batch Process Vents Table 3 to Subpart FFFF of Part 63--Emission Limits for Hydrogen Halide and Halogen HAP Emissions or PM HAP Emissions from Process Vents Table 4 to Subpart FFFF of Part 63--Emission Limits for Storage Tanks Table 5 to Subpart FFFF of Part 63--Emission Limits and Work Practice Standards for Transfer Racks Table 6 to Subpart FFFF of Part 63--Requirements for Equipment Leaks Table 7 to Subpart FFFF of Part 63--Requirements for Wastewater Streams and Liquid Streams in Open Systems Within an MCPU Table 8 to Subpart FFFF of Part 63--Partially Soluble Hazardous Air Pollutants [[Page 12]] Table 9 to Subpart FFFF of Part 63--Soluble Hazardous Air Pollutants Table 10 to Subpart FFFF of Part 63--Requirements for Heat Exchange Systems Table 11 to Subpart FFFF of Part 63--Requirements for Reports Table 12 to Subpart FFFF of Part 63--Applicability of General Provisions (Subpart A) to Subpart FFFF Subpart GGGG_National Emission Standards for Hazardous Air Pollutants: Solvent Extraction for Vegetable Oil Production What This Subpart Covers 63.2830 What is the purpose of this subpart? 63.2831 Where can I find definitions of key words used in this subpart? 63.2832 Am I subject to this subpart? 63.2833 Is my source categorized as existing or new? 63.2834 When do I have to comply with the standards in this subpart? Standards 63.2840 What emission requirements must I meet? Compliance Requirements 63.2850 How do I comply with the hazardous air pollutant emission standards? 63.2851 What is a plan for demonstrating compliance? 63.2852 What is a startup, shutdown, and malfunction plan? 63.2853 How do I determine the actual solvent loss? 63.2854 How do I determine the weighted average volume fraction of HAP in the actual solvent loss? 63.2855 How do I determine the quantity of oilseed processed? Notifications, Reports, and Records 63.2860 What notifications must I submit and when? 63.2861 What reports must I submit and when? 63.2862 What records must I keep? 63.2863 In what form and how long must I keep my records? Other Requirements and Information 63.2870 What parts of the General Provisions apply to me? 63.2871 Who implements and enforces this subpart? 63.2872 What definitions apply to this subpart? Subpart HHHH_National Emission Standards for Hazardous Air Pollutants for Wet-Formed Fiberglass Mat Production What This Subpart Covers 63.2980 What is the purpose of this subpart? 63.2981 Does this subpart apply to me? 63.2982 What parts of my plant does this subpart cover? Emission Limitations 63.2983 What emission limits must I meet? 63.2984 What operating limits must I meet? 63.2985 When do I have to comply with these standards? 63.2986 How do I comply with the standards? Operation, Maintenance, and Monitoring Plan 63.2987 What must my operation, maintenance, and monitoring (OMM) plan include? 63.2988 [Reserved] 63.2989 How do I change my (OMM) plan? 63.2990 Can I conduct short-term experimental production runs that cause parameters to deviate from operating limits? Testing and Initial Compliance Requirements 63.2991 When must I conduct performance tests? 63.2992 How do I conduct a performance test? 63.2993 What test methods must I use in conducting performance tests? 63.2994 How do I verify the performance of monitoring equipment? 63.2995 What equations must I use to determine compliance? Monitoring Requirements 63.2996 What must I monitor? 63.2997 What are the requirements for monitoring devices? Notifications, Reports, and Records 63.2998 What records must I maintain? 63.2999 In what form and for how long must I maintain records? 63.3000 What notifications and reports must I submit? Other Requirements and Information 63.3001 What sections of the general provisions apply to me? 63.3002 Who implements and enforces this subpart? 63.3003 Incorporation by reference. 63.3004 What definitions apply to this subpart? [[Page 13]] 63.3005-63.3079 [Reserved] Table 1 to Subpart HHHH of Part 63--Minimum Requirements for Monitoring and Recordkeeping Table 2 to Subpart HHHH of Part 63--Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart HHHH Appendix A to Subpart HHHH of Part 63--Method for Determining Free- Formaldehyde in Urea-Formaldehyde Resins by Sodium Sulfite (Iced & Cooled) Appendix B to Subpart HHHH of Part 63--Method for the Determination of Loss-on-Ignition Subpart IIII_National Emission Standards for Hazardous Air Pollutants: Surface Coating of Automobiles and Light-Duty Trucks What This Subpart Covers Sec. 63.3080 What is the purpose of this subpart? 63.3081 Am I subject to this subpart? 63.3082 What parts of my plant does this subpart cover? 63.3083 When do I have to comply with this subpart? Emission Limitations 63.3090 What emission limits must I meet for a new or reconstructed affected source? 63.3091 What emission limits must I meet for an existing affected source? 63.3092 How must I control emissions from my electrodeposition primer system if I want to comply with the combined primer-surfacer, topcoat, final repair, glass bonding primer, and glass bonding adhesive emission limit? 63.3093 What operating limits must I meet? 63.3094 What work practice standards must I meet? General Compliance Requirements 63.3100 What are my general requirements for complying with this subpart? 63.3101 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.3110 What notifications must I submit? 63.3120 What reports must I submit? 63.3130 What records must I keep? 63.3131 In what form and for how long must I keep my records? Compliance Requirements for Adhesive, Sealer, and Deadener 63.3150 By what date must I conduct the initial compliance demonstration? 63.3151 How do I demonstrate initial compliance with the emission limitations? 63.3152 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Combined Electrodeposition Primer, Primer-Surfacer, Topcoat, Final Repair, Glass Bonding Primer, and Glass Bonding Adhesive Emission Limitations 63.3160 By what date must I conduct performance tests and other initial compliance demonstrations? 63.3161 How do I demonstrate initial compliance? 63.3162 [Reserved] 63.3163 How do I demonstrate continuous compliance with the emission limitations? 63.3164 What are the general requirements for performance tests? 63.3165 How do I determine the emission capture system efficiency? 63.3166 How do I determine the add-on control device emission destruction or removal efficiency? 63.3167 How do I establish the add-on control device operating limits during the performance test? 63.3168 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Compliance Requirements for the Combined Primer-Surfacer, Topcoat, Final Repair, Glass Bonding Primer, and Glass Bonding Adhesive Emission Limitations and the Separate Electrodeposition Primer Emission Limitations 63.3170 By what date must I conduct performance tests and other initial compliance demonstrations? 63.3171 How do I demonstrate initial compliance? 63.3172 [Reserved] 63.3173 How do I demonstrate continuous compliance with the emission limitations? Other Requirements and Information 63.3175 Who implements and enforces this subpart? 63.3176 What definitions apply to this subpart? Tables to Subpart IIII of Part 63 Table 1 to Subpart IIII of Part 63. Operating Limits for Capture Systems and Add-On Control Devices Table 2 to Subpart IIII of Part 63. Applicability of General Provisions to Subpart IIII of Part 63 Table 3 to Subpart IIII of Part 63. Default Organic HAP Mass Fraction for Solvents and Solvent Blends [[Page 14]] Table 4 to Subpart IIII of Part 63. Default Organic HAP Mass Fraction for Petroleum Solvent Groups Appendix A to Subpart IIII of Part 63--Determination of Capture Efficiency of Automobile and Light-Duty Truck Spray Booth Emissions from Solvent-borne Coatings Using Panel Testing Subpart JJJJ_National Emission Standards for Hazardous Air Pollutants: Paper and Other Web Coating What This Subpart Covers 63.3280 What is in this subpart? 63.3290 Does this subpart apply to me? 63.3300 Which of my emission sources are affected by this subpart? 63.3310 What definitions are used in this subpart? Emission Standards and Compliance Dates 63.3320 What emission standards must I meet? 63.3321 What operating limits must I meet? 63.3330 When must I comply? General Requirements for Compliance With the Emission Standards and for Monitoring and Performance Tests 63.3340 What general requirements must I meet to comply with the standards? 63.3350 If I use a control device to comply with the emission standards what monitoring must I do? 63.3360 What performance tests must I conduct? Requirements for Showing Compliance 63.3370 How do I demonstrate compliance with the emission standards? Notifications, Reports, and Records 63.3400 What notifications and reports must I submit? 63.3410 What records must I keep? Delegation of Authority 63.3420 What authorities may be delegated to the States? Table 1 to Subpart JJJJ of Part 63--Operating Limits if Using Add-On Control Devices and Capture System Table 2 to Subpart JJJJ of Part 63--Applicability of 40 CFR Part 63 General Provisions to Subpart JJJJ Subpart KKKK_National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Cans What This Subpart Covers 63.3480 What is the purpose of this subpart? 63.3481 Am I subject to this subpart? 63.3482 What parts of my plant does this subpart cover? 63.3483 When do I have to comply with this subpart? Emission Limitations 63.3490 What emission limits must I meet? 63.3491 What are my options for meeting the emission limits? 63.3492 What operating limits must I meet? 63.3493 What work practice standards must I meet? General Compliance Requirements 63.3500 What are my general requirements for complying with this subpart? 63.3501 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.3510 What notifications must I submit? 63.3511 What reports must I submit? 63.3512 What records must I keep? 63.3513 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.3520 By what date must I conduct the initial compliance demonstration? 63.3521 How do I demonstrate initial compliance with the emission limitations? 63.3522 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.3530 By what date must I conduct the initial compliance demonstration? 63.3531 How do I demonstrate initial compliance with the emission limitations? 63.3532 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.3540 By what date must I conduct performance tests and other initial compliance demonstrations? 63.3541 How do I demonstrate initial compliance? 63.3542 How do I demonstrate continuous compliance with the emission limitations? 63.3543 What are the general requirements for performance tests? 63.3544 How do I determine the emission capture system efficiency? 63.3545 How do I determine the add-on control device emission destruction or removal efficiency? 63.3546 How do I establish the emission capture system and add-on control device [[Page 15]] operating limits during the performance test? 63.3547 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Compliance Requirements for the Control Efficiency/Outlet Concentration Option 63.3550 By what date must I conduct performance tests and other initial compliance demonstrations? 63.3551 How do I demonstrate initial compliance? 63.3552 How do I demonstrate continuous compliance with the emission limitations? 63.3553 What are the general requirements for performance tests? 63.3554 How do I determine the emission capture system efficiency? 63.3555 How do I determine the outlet THC emissions and add-on control device emission destruction or removal efficiency? 63.3556 How do I establish the emission capture system and add-on control device operating limits during the performance test? 63.3557 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Other Requirements and Information 63.3560 Who implements and enforces this subpart? 63.3561 What definitions apply to this subpart? Table 1 to Subpart KKKK of Part 63--Emission Limits for New or Reconstructed Affected Sources Table 2 to Subpart KKKK of Part 63--Emission Limits for Existing Affected Sources Table 3 to Subpart KKKK of Part 63--Emission Limits for Affected Sources Using the Control Efficiency/Outlet Concentration Compliance Option Table 4 to Subpart KKKK of Part 63--Operating Limits if Using the Emission Rate with Add-on Controls Option or the Control Efficiency/Outlet Concentration Compliance Option Table 5 to Subpart KKKK of Part 63--Applicability of General Provisions to Subpart KKKK Table 6 to Subpart KKKK of Part 63--Default Organic HAP Mass Fraction for Solvents and Solvent Blends Table 7 to Subpart KKKK of Part 63--Default Organic HAP Mass Fraction for Petroleum Solvent Groups Subpart MMMM_National Emission Standards for Hazardous Air Pollutants for Surface Coating of Miscellaneous Metal Parts and Products What This Subpart Covers 63.3880 What is the purpose of this subpart? 63.3881 Am I subject to this subpart? 63.3882 What parts of my plant does this subpart cover? 63.3883 When do I have to comply with this subpart? Emission Limitations 63.3890 What emission limits must I meet? 63.3891 What are my options for meeting the emission limits? 63.3892 What operating limits must I meet? 63.3893 What work practice standards must I meet? General Compliance Requirements 63.3900 What are my general requirements for complying with this subpart? 63.3901 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.3910 What notifications must I submit? 63.3920 What reports must I submit? 63.3930 What records must I keep? 63.3931 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.3940 By what date must I conduct the initial compliance demonstration? 63.3941 How do I demonstrate initial compliance with the emission limitations? 63.3942 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.3950 By what date must I conduct the initial compliance demonstration? 63.3951 How do I demonstrate initial compliance with the emission limitations? 63.3952 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.3960 By what date must I conduct performance tests and other initial compliance demonstrations? 63.3961 How do I demonstrate initial compliance? [[Page 16]] 63.3962 [Reserved] 63.3963 How do I demonstrate continuous compliance with the emission limitations? 63.3964 What are the general requirements for performance tests? 63.3965 How do I determine the emission capture system efficiency? 63.3966 How do I determine the add-on control device emission destruction or removal efficiency? 63.3967 How do I establish the emission capture system and add-on control device operating limits during the performance test? 63.3968 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Other Requirements and Information 63.3980 Who implements and enforces this subpart? 63.3981 What definitions apply to this subpart? Table 1 to Subpart MMMM of Part 63--Operating Limits if Using the Emission Rate with Add-on Controls Option Table 2 to Subpart MMMM of Part 63--Applicability of General Provisions to Subpart MMMM of Part 63 Table 3 to Subpart MMMM of Part 63--Default Organic HAP Mass Fraction for Solvents and Solvent Blends Table 4 to Subpart MMMM of Part 63--Default Organic HAP Mass Fraction for Petroleum Solvent Groups Appendix A to Subpart MMMM of Part 63--Alternative Capture Efficiency and Destruction Efficiency Measurement and Capture Efficiency Monitoring Procedures for Magnet Wire Coating Operations Subpart NNNN_National Emission Standards for Hazardous Air Pollutants: Surface Coating of Large Appliances What This Subpart Covers 63.4080 What is the purpose of this subpart? 63.4081 Am I subject to this subpart? 63.4082 What parts of my plant does this subpart cover? 63.4083 When do I have to comply with this subpart? Emission Limitations 63.4090 What emission limits must I meet? 63.4091 What are my options for meeting the emission limits? 63.4092 What operating limits must I meet? 63.4093 What work practice standards must I meet? General Compliance Requirements 63.4100 What are my general requirements for complying with this subpart? 63.4101 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.4110 What notifications must I submit? 63.4120 What reports must I submit? 63.4130 What records must I keep? 63.4131 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.4140 By what date must I conduct the initial compliance demonstration? 63.4141 How do I demonstrate initial compliance with the emission limitations? 63.4142 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.4150 By what date must I conduct the initial compliance demonstration? 63.4151 How do I demonstrate initial compliance with the emission limitations? 63.4152 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.4160 By what date must I conduct performance tests and other initial compliance demonstrations? 63.4161 How do I demonstrate initial compliance? 63.4162 [Reserved] 63.4163 How do I demonstrate continuous compliance with the emission limitations? 63.4164 What are the general requirements for performance tests? 63.4165 How do I determine the emission capture system efficiency? 63.4166 How do I determine the add-on control device emission destruction or removal efficiency? 63.4167 How do I establish the emission capture system and add-on control device operating limits during the performance test? 63.4168 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Other Requirements and Information 63.4180 Who implements and enforces this subpart? 63.4181 What definitions apply to this subpart? [[Page 17]] Table 1 to Subpart NNNN of Part 63--Operating Limits if Using the Emission Rate with Add-on Controls Option Table 2 to Subpart NNNN of Part 63--Applicability of General Provisions to Subpart NNNN Table 3 to Subpart NNNN of Part 63--Default Organic HAP Mass Fraction for Solvents and Solvent Blends Table 4 to Subpart NNNN of Part 63--Default Organic Mass Fraction for Petroleum Solvent Groups Subpart OOOO_National Emission Standards for Hazardous Air Pollutants: Printing, Coating, and Dyeing of Fabrics and Other Textiles What This Subpart Covers 63.4280 What is the purpose of this subpart? 63.4281 Am I subject to this subpart? 63.4282 What parts of my plant does this subpart cover? 63.4283 When do I have to comply with this subpart? Emission Limitations 63.4290 What emission limits must I meet? 63.4291 What are my options for meeting the emission limits? 63.4292 What operating limits must I meet? 63.4293 What work practice standards must I meet? General Compliance Requirements 63.4300 What are my general requirements for complying with this subpart? 63.4301 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.4310 What notifications must I submit? 63.4311 What reports must I submit? 63.4312 What records must I keep? 63.4313 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.4320 By what date must I conduct the initial compliance demonstration? 63.4321 How do I demonstrate initial compliance with the emission limitations? 63.4322 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.4330 By what date must I conduct the initial compliance demonstration? 63.4331 How do I demonstrate initial compliance with the emission limitations? 63.4332 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.4340 By what date must I conduct performance tests and other initial compliance demonstrations? 63.4341 How do I demonstrate initial compliance? 63.4342 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Organic HAP Overall Control Efficiency and Oxidizer Outlet Organic HAP Concentration Options 63.4350 By what date must I conduct performance tests and other initial compliance demonstrations? 63.4351 How do I demonstrate initial compliance? 63.4352 How do I demonstrate continuous compliance with the emission limitations? Performance Testing and Monitoring Requirements 63.4360 What are the general requirements for performance tests? 63.4361 How do I determine the emission capture system efficiency? 63.4362 How do I determine the add-on control device emission destruction or removal efficiency? 63.4363 How do I establish the add-on control device operating limits during the performance test? 63.4364 What are the requirements for CPMS installation, operation, and maintenance? Other Requirements and Information 63.4370 Who implements and enforces this subpart? 63.4371 What definitions apply to this subpart? Table 1 to Subpart OOOO of Part 63--Emission Limits for New or Reconstructed and Existing Affected Sources in the Printing, Coating, and Dyeing of Fabrics and Other Textiles Source Category Table 2 to Subpart OOOO of Part 63--Operating Limits if Using Add-On Control Devices and Capture System Table 3 to Subpart OOOO of Part 63--Applicability of General Provisions to Subpart OOOO Table 4 to Subpart OOOO of Part 63--Default Organic HAP Mass Fraction for Solvents and Solvent Blends [[Page 18]] Table 5 to Subpart OOOO of Part 63--Default Organic HAP Mass Fraction for Petroleum Solvent Groups Subpart PPPP_National Emission Standards for Hazardous Air Pollutants for Surface Coating of Plastic Parts and Products What This Subpart Covers 63.4480 What is the purpose of this subpart? 63.4481 Am I subject to this subpart? 63.4482 What parts of my plant does this subpart cover? 63.4483 When do I have to comply with this subpart? Emission Limitations 63.4490 What emission limits must I meet? 63.4491 What are my options for meeting the emission limits? 63.4492 What operating limits must I meet? 63.4493 What work practice standards must I meet? General Compliance Requirements 63.4500 What are my general requirements for complying with this subpart? 63.4501 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.4510 What notifications must I submit? 63.4520 What reports must I submit? 63.4530 What records must I keep? 63.4531 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.4540 By what date must I conduct the initial compliance demonstration? 63.4541 How do I demonstrate initial compliance with the emission limitations? 63.4542 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.4550 By what date must I conduct the initial compliance demonstration? 63.4551 How do I demonstrate initial compliance with the emission limitations? 63.4552 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.4560 By what date must I conduct performance tests and other initial compliance demonstrations? 63.4561 How do I demonstrate initial compliance? 63.4562 [Reserved] 63.4563 How do I demonstrate continuous compliance with the emission limitations? 63.4564 What are the general requirements for performance tests? 63.4565 How do I determine the emission capture system efficiency? 63.4566 How do I determine the add-on control device emission destruction or removal efficiency? 63.4567 How do I establish the emission capture system and add-on control device operating limits during the performance test? 63.4568 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Other Requirements and Information 63.4580 Who implements and enforces this subpart? 63.4581 What definitions apply to this subpart? Table 1 to Subpart PPPP--Operating Limits if Using the Emission Rate with Add-on Controls Option Table 2 to Subpart PPPP--Applicability of General Provisions to Subpart PPPP of Part 63 Table 3 to Subpart PPPP--Default Organic HAP Mass Fraction for Solvents and Solvent Blends Table 4 to Subpart PPPP--Default Organic HAP Mass Fraction for Petroleum Solvent Groups Appendix A to Subpart PPPP--Determination of Weight Volatile Matter Content and Weight Solids Content of Reactive Adhesives Subpart QQQQ_National Emission Standards for Hazardous Air Pollutants: Surface Coating of Wood Building Products What This Subpart Covers 63.4680 What is the purpose of this subpart? 63.4681 Am I subject to this subpart? 63.4682 What parts of my plant does this subpart cover? 63.4683 When do I have to comply with this subpart? Emission Limitations 63.4690 What emission limits must I meet? 63.4691 What are my options for meeting the emission limits? 63.4692 What operating limits must I meet? 63.4693 What work practice standards must I meet? General Compliance Requirements 63.4700 What are my general requirements for complying with this subpart? 63.4701 What parts of the General Provisions apply to me? [[Page 19]] Notifications, Reports, and Records 63.4710 What notifications must I submit? 63.4720 What reports must I submit? 63.4730 What records must I keep? 63.4731 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.4740 By what date must I conduct the initial compliance demonstration? 63.4741 How do I demonstrate initial compliance with the emission limitations? 63.4742 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.4750 By what date must I conduct the initial compliance demonstration? 63.4751 How do I demonstrate initial compliance with the emission limitations? 63.4752 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.4760 By what date must I conduct performance tests and other initial compliance demonstrations? 63.4761 How do I demonstrate initial compliance? 63.4762 [Reserved] 63.4763 How do I demonstrate continuous compliance with the emission limitations? 63.4764 What are the general requirements for performance tests? 63.4765 How do I determine the emission capture system efficiency? 63.4766 How do I determine the add-on control device emission destruction or removal efficiency? 63.4767 How do I establish the emission capture system and add-on control device operating limits during the performance test? 63.4768 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Other Requirements and Information 63.4780 Who implements and enforces this subpart? 63.4781 What definitions apply to this subpart? Table 1 to Subpart QQQQ of Part 63--Emission Limits for New or Reconstructed Affected Sources Table 2 to Subpart QQQQ of Part 63--Emission Limits for Existing Affected Sources Table 3 to Subpart QQQQ of Part 63--Operating Limits if Using the Emission Rate with Add-on Controls Option Table 4 to Subpart QQQQ of Part 63--Applicability of General Provisions to Subpart QQQQ of Part 63 Table 5 to Subpart QQQQ of Part 63--Default Organic HAP Mass Fraction for Solvents and Solvent Blends Table 6 to Subpart QQQQ of Part 63--Default Organic HAP Mass Fraction for Petroleum Solvent Groups Subpart RRRR_National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Furniture What This Subpart Covers 63.4880 What is the purpose of this subpart? 63.4881 Am I subject to this subpart? 63.4882 What parts of my plant does this subpart cover? 63.4883 When do I have to comply with this subpart? Emission Limitations 63.4890 What Emission Limits Must I Meet? 63.4891 What are my options for demonstrating compliance with the emission limits? 63.4892 What operating limits must I meet? 63.4893 What work practice standards must I meet? General Compliance Requirements 63.4900 What are my general requirements for complying with this subpart? 63.4901 What parts of the General Provisions apply to me? Notifications, Reports, and Records 63.4910 What notifications must I submit? 63.4920 What reports must I submit? 63.4930 What records must I keep? 63.4931 In what form and for how long must I keep my records? Compliance Requirements for the Compliant Material Option 63.4940 By what date must I conduct the initial compliance demonstration? 63.4941 How do I demonstrate initial compliance with the emission limitations? 63.4942 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate Without Add-On Controls Option 63.4950 By what date must I conduct the initial compliance demonstration? 63.4951 How do I demonstrate initial compliance with the emission limitations? [[Page 20]] 63.4952 How do I demonstrate continuous compliance with the emission limitations? Compliance Requirements for the Emission Rate With Add-On Controls Option 63.4960 By what date must I conduct performance tests and other initial compliance demonstrations? 63.4961 How do I demonstrate initial compliance? 63.4962 How do I demonstrate continuous compliance with the emission limitations? 63.4963 What are the general requirements for performance tests? 63.4964 How do I determine the emission capture system efficiency? 63.4965 How do I determine the add-on control device emission destruction or removal efficiency? 63.4966 How do I establish the emission capture system and add-on control device operating limits during the performance test? 63.4967 What are the requirements for continuous parameter monitoring system installation, operation, and maintenance? Other Requirements and Information 63.4980 Who implements and enforces this subpart? 63.4981 What definitions apply to this subpart? Table 1 to Subpart RRRR of Part 63--Operating Limits if Using the Emission Rate with Add-on Controls Option Table 2 to Subpart RRRR of Part 63--Applicability of General Provisions to Subpart RRRR Table 3 to Subpart RRRR of Part 63--Default Organic HAP Mass Fraction for Solvents and Solvent Blends Table 4 to Subpart RRRR of Part 63--Default Organic HAP Mass Fraction for Petroleum Solvent Groups Subpart SSSS_National Emission Standards for Hazardous Air Pollutants: Surface Coating of Metal Coil What This Subpart Covers 63.5080 What is in this subpart? 63.5090 Does this subpart apply to me? 63.5100 Which of my emissions sources are affected by this subpart? 63.5110 What special definitions are used in this subpart? Emission Standards and Compliance Dates 63.5120 What emission standards must I meet? 63.5121 What operating limits must I meet? 63.5130 When must I comply? General Requirements for Compliance with the Emission Standards and for Monitoring and Performance Tests 63.5140 What general requirements must I meet to comply with the standards? 63.5150 If I use a control device to comply with the emission standards, what monitoring must I do? 63.5160 What performance tests must I complete? Requirements for Showing Compliance 63.5170 How do I demonstrate compliance with the standards? Reporting and Recordkeeping 63.5180 What reports must I submit? 63.5190 What records must I maintain? Delegation of Authority 63.5200 What authorities may be delegated to the States? 63.5201-63.5209 [Reserved] Table 1 to Subpart SSSS of Part 63--Operating Limits if Using Add-on Control Devices and Capture System Table 2 to Subpart SSSS of Part 63--Applicability of General Provisions to Subpart SSSS Subpart TTTT_National Emission Standards for Hazardous Air Pollutants for Leather Finishing Operations What This Subpart Covers 63.5280 What is the purpose of this subpart? 63.5285 Am I subject to this subpart? 63.5290 What parts of my facility does this subpart cover? 63.5295 When do I have to comply with this subpart? Standards 63.5305 What emission standards must I meet? Compliance Requirements 63.5320 How does my affected major source comply with the HAP emission standards? 63.5325 What is a plan for demonstrating compliance and when must I have one in place? 63.5330 How do I determine the compliance ratio? 63.5335 How do I determine the actual HAP loss? 63.5340 How do I determine the allowable HAP loss? 63.5345 How do I distinguish between the two upholstery product process operations? 63.5350 How do I distinguish between the water-resistant/specialty and nonwater- [[Page 21]] resistant leather product process operations? 63.5355 How do I monitor and collect data to demonstrate continuous compliance? 63.5360 How do I demonstrate continuous compliance with the emission standards? Testing and Initial Compliance Requirements 63.5375 When must I conduct a performance test or initial compliance demonstration? 63.5380 How do I conduct performance tests? 63.5385 How do I measure the quantity of finish applied to the leather? 63.5390 How do I measure the HAP content of a finish? 63.5395 How do I measure the density of a finish? 63.5400 How do I measure the quantity of leather processed? Notifications, Reports, and Records 63.5415 What notifications must I submit and when? 63.5420 What reports must I submit and when? 63.5425 When must I start recordkeeping to determine my compliance ratio? 63.5430 What records must I keep? 63.5435 In what form and how long must I keep my records? Other Requirements and Information 63.5450 What parts of the General Provisions apply to me? 63.5455 Who administers this subpart? 63.5460 What definitions apply to this subpart? Figure 1 to Subpart TTTT of Part 63--Example Logs for Recording Leather Finish Use and HAP Content Table 1 to Subpart TTTT of Part 63--Leather Finishing HAP Emission Limits for Determining the Allowable HAP Loss Table 2 to Subpart TTTT of Part 63--Applicability of General Provisions to Subpart TTTT Subpart UUUU_National Emission Standards for Hazardous Air Pollutants for Cellulose Products Manufacturing What This Subpart Covers 63.5480 What is the purpose of this subpart? 63.5485 Am I subject to this subpart? 63.5490 What parts of my plant does this subpart cover? 63.5495 When do I have to comply with this subpart? Emission Limits, Operating Limits, and Work Practice Standards 63.5505 What emission limits, operating limits, and work practice standards must I meet? General Compliance Requirements 63.5515 What are my general requirements for complying with this subpart? Testing and Initial Compliance Requirements 63.5530 How do I demonstrate initial compliance with the emission limits and work practice standards? 63.5535 What performance tests and other procedures must I use? 63.5540 By what date must I conduct a performance test or other initial compliance demonstration? 63.5545 What are my monitoring installation, operation, and maintenance requirements? Continuous Compliance Requirements 63.5555 How do I demonstrate continuous compliance with the emission limits, operating limits, and work practice standards? 63.5560 How do I monitor and collect data to demonstrate continuous compliance? Notifications, Reports, and Records 63.5575 What notifications must I submit and when? 63.5580 What reports must I submit and when? 63.5585 What records must I keep? 63.5590 In what form and how long must I keep my records? Other Requirements and Information 63.5595 What compliance options do I have if part of my affected source is subject to both this subpart and another subpart? 63.5600 What other requirements apply to me? 63.5605 Who implements and enforces this subpart? 63.5610 What definitions apply to this subpart? Table 1 to Subpart UUUU of Part 63--Emission Limits and Work Practice Standards Table 2 to Subpart UUUU of Part 63--Operating Limits Table 3 to Subpart UUUU of Part 63--Initial Compliance With Emission Limits and Work Practice Standards Table 4 to Subpart UUUU of Part 63--Requirements for Performance Tests Table 5 to Subpart UUUU of Part 63--Continuous Compliance with Emission Limits and Work Practice Standards [[Page 22]] Table 6 to Subpart UUUU of Part 63--Continuous Compliance with Operating Limits Table 7 to Subpart UUUU of Part 63--Requirements for Notifications Table 8 to Subpart UUUU of Part 63--Requirements for Reports Table 9 to Subpart UUUU of Part 63--Requirements for Recordkeeping Table 10 to Subpart UUUU of Part 63--Applicability of General Provisions to Subpart UUUU Subpart VVVV_National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing What the Subpart Covers 63.5680 What is the purpose of this subpart? 63.5683 Does this subpart apply to me? 63.5686 How do I demonstrate that my facility is not a major source? 63.5689 What parts of my facility are covered by this subpart? 63.5692 How do I know if my boat manufacturing facility is a new source or an existing source? 63.5695 When must I comply with this subpart? Standards for Open Molding Resin and Gel Coat Operations 63.5698 What emission limit must I meet for open molding resin and gel coat operations? 63.5701 What are my options for complying with the open molding emission limit? 63.5704 What are the general requirements for complying with the open molding emission limit? 63.5707 What is an implementation plan for open molding operations and when do I need to prepare one? 63.5710 How do I demonstrate compliance using emissions averaging? 63.5713 How do I demonstrate compliance using compliant materials? 63.5714 How do I demonstrate compliance if I use filled resins? Demonstrating Compliance for Open Molding Operations Controlled by Add- on Control Devices 63.5715 What operating limits must I meet? 63.5716 When must I conduct a performance test? 63.5719 How do I conduct a performance test? 63.5722 How do I use the performance test data to demonstrate initial compliance? 63.5725 What are the requirements for monitoring and demonstrating continuous compliance? Standards for Closed Molding Resin Operations 63.5728 What standards must I meet for closed molding resin operations? Standards for Resin and Gel Coat Mixing Operations 63.5731 What standards must I meet for resin and gel coat mixing operations? Standards for Resin and Gel Coat Application Equipment Cleaning Operations 63.5734 What standards must I meet for resin and gel coat application equipment cleaning operations? 63.5737 How do I demonstrate compliance with the resin and gel coat application equipment cleaning standards? Standards for Carpet and Fabric Adhesive Operations 63.5740 What emission limit must I meet for carpet and fabric adhesive operations? Standards for Aluminum Recreational Boat Surface Coating Operations 63.5743 What standards must I meet for aluminum recreational boat surface coating operations? 63.5746 How do I demonstrate compliance with the emission limits for aluminum wipedown solvents and aluminum coatings? 63.5749 How do I calculate the organic HAP content of aluminum wipedown solvents? 63.5752 How do I calculate the organic HAP content of aluminum recreational boat surface coatings? 63.5753 How do I calculate the combined organic HAP content of aluminum wipedown solvents and aluminum recreational boat surface coatings? 63.5755 How do I demonstrate compliance with the aluminum recreational boat surface coating spray gun cleaning work practice standards? Methods for Determining Hazardous Air Pollutant Content 63.5758 How do I determine the organic HAP content of materials? Notifications, Reports, and Records 63.5761 What notifications must I submit and when? 63.5764 What reports must I submit and when? 63.5767 What records must I keep? 63.5770 In what form and for how long must I keep my records? Other Information You Need To Know 63.5773 What parts of the General Provisions apply to me? [[Page 23]] 63.5776 Who implements and enforces this subpart? Definitions 63.5779 What definitions apply to this subpart? Table 1 to Subpart VVVV of Part 63--Compliance Dates for New and Existing Boat Manufacturing Facilities Table 2 to Subpart VVVV of Part 63--Alternative HAP Content Requirements for Open Molding Resin and Gel Coat Operations Table 3 to Subpart VVVV of Part 63--MACT Model Point Value Formulas for Open Molding Operations Table 4 to Subpart VVVV of Part 63--Operating Limits If Using an Add-on Control Device for Open Molding Operations Table 5 to Subpart VVVV of Part 63--Default Organic HAP Contents of Solvents and Solvent Blends Table 6 to Subpart VVVV of Part 63--Default Organic HAP Contents of Petroleum Solvent Groups Table 7 to Subpart VVVV of Part 63--Applicability and Timing of Notifications Table 8 to Subpart VVVV of Part 63--Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart VVVV Subpart WWWW_National Emissions Standards for Hazardous Air Pollutants: Reinforced Plastic Composites Production What This Subpart Covers 63.5780 What is the purpose of this subpart? 63.5785 Am I subject to this subpart? 63.5787 What if I also manufacture fiberglass boats or boat parts? 63.5790 What parts of my plant does this subpart cover? 63.5795 How do I know if my reinforced plastic composites production facility is a new affected source or an existing affected source? Calculating Organic HAP Emissions Factors for Open Molding and Centrifugal Casting 63.5796 What are the organic HAP emissions factor equations in Table 1 to this subpart and how are they used in this subpart? 63.5797 How do I determine the organic HAP content of my resins and gel coats? 63.5798 What if I want to use, or I manufacture, an application technology (new or existing) whose organic HAP emissions characteristics are not represented by the equations in Table 1 to this subpart? 63.5799 How do I calculate my facility's organic HAP emissions on a tpy basis for purposes of determining which paragraphs of Sec. 63.5805 apply? Compliance Dates and Standards 63.5800 When do I have to comply with this subpart? 63.5805 What standards must I meet to comply with this subpart? Options for Meeting Standards 63.5810 What are my options for meeting the standards for open molding and centrifugal casting operations at new and existing sources? 63.5820 What are my options for meeting the standards for continuous lamination/casting operations? 63.5830 What are my options for meeting the standards for pultrusion operations subject to the 60 weight percent organic HAP emissions reductions requirement? General Compliance Requirements 63.5835 What are my general requirements for complying with this subpart? Testing and Initial Compliance Requirements 63.5840 By what date must I conduct a performance test or other initial compliance demonstration? 63.5845 When must I conduct subsequent performance tests? 63.5850 How do I conduct performance tests, performance evaluations, and design evaluations? 63.5855 What are my monitor installation and operation requirements? 63.5860 How do I demonstrate initial compliance with the standards? Emissions Factor, Percent Reduction, and Capture Efficiency Calculation Procedures for Continuous Lamination/Casting Operations 63.5865 What data must I generate to demonstrate compliance with the standards for continuous lamination/casting operations? 63.5870 How do I calculate annual uncontrolled and controlled organic HAP emissions from my wet-out area(s) and from my oven(s) for continuous lamination/casting operations? 63.5875 How do I determine the capture efficiency of the enclosure on my wet-out area and the capture efficiency of my oven(s) for continuous lamination/casting operations? 63.5880 How do I determine how much neat resin plus is applied to the line and how much neat gel coat plus is applied to the line for continuous lamination/casting operations? [[Page 24]] 63.5885 How do I calculate percent reduction to demonstrate compliance for continuous lamination/casting operations? 63.5890 How do I calculate an organic HAP emissions factor to demonstrate compliance for continuous lamination/casting operations? Continuous Compliance Requirements 63.5895 How do I monitor and collect data to demonstrate continuous compliance? 63.5900 How do I demonstrate continuous compliance with the standards? Notifications, Reports, and Records 63.5905 What notifications must I submit and when? 63.5910 What reports must I submit and when? 63.5915 What records must I keep? 63.5920 In what form and how long must I keep my records? Other Requirements and Information 63.5925 What parts of the General Provisions apply to me? 63.5930 Who implements and enforces this subpart? 63.5935 What definitions apply to this subpart? Table 1 to Subpart WWWW of Part 63--Equations To Calculate Organic HAP Emissions Factors for Specific Open Molding and Centrifugal Casting Process Streams Table 2 to Subpart WWWW of Part 63--Compliance Dates for New and Existing Reinforced Plastic Composites Facilities Table 3 to Subpart WWWW of Part 63--Organic HAP Emissions Limits for Existing Open Molding Sources, New Open Molding Sources Emitting Less Than 100 TPY of HAP, and New and Existing Centrifugal Casting and Continuous Lamination/Casting Sources That Emit Less Than 100 TPY of HAP Table 4 to Subpart WWWW of Part 63--Work Practice Standards Table 5 to Subpart WWWW of Part 63--Alternative Organic HAP Emissions Limits for Open Molding, Centrifugal Casting, and SMC Manufacturing Operations Where the Standards are Based on a 95 Percent Reduction Requirement Table 6 to Subpart WWWW of Part 63--Basic Requirements for Performance Tests, Performance Evaluations, and Design Evaluations for New and Existing Sources Using Add-On Control Devices Table 7 to Subpart WWWW of Part 63--Options Allowing Use of the Same Resin Across Different Operations That Use the Same Resin Type Table 8 to Subpart WWWW of Part 63--Initial Compliance With Organic HAP Emissions Limits Table 9 to Subpart WWWW of Part 63--Initial Compliance With Work Practice Standards. Table 10 to Subpart WWWW of Part 63--Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying with a Percent Reduction Limit on a Per Line Basis Table 11 to Subpart WWWW of Part 63--Data Requirements for New and Existing Continuous Lamination and Continuous Casting Lines Complying with a Percent Reduction Limit or a Lbs/Ton Limit on an Averaging Basis Table 12 to Subpart WWWW of Part 63--Data Requirements for New and Existing Continuous Lamination Lines and Continuous Casting Lines Complying with a Lbs/Ton Organic HAP Emissions Limit on a Per Line Basis Table 13 to Subpart WWWW of Part 63--Applicability and Timing of Notifications Table 14 to Subpart WWWW of Part 63--Requirements for Reports Table 15 to Subpart WWWW of Part 63--Applicability of General Provisions (Subpart A) to Subpart WWWW of Part 63 Appendix A to Subpart WWWW of Part 63--Test Method for Determining Vapor Suppressant Effectiveness Subpart XXXX_National Emission Standards for Hazardous Air Pollutants: Rubber Tire Manufacturing What This Subpart Covers 63.5980 What is the purpose of this subpart? 63.5981 Am I subject to this subpart? 63.5982 What parts of my facility does this subpart cover? 63.5983 When do I have to comply with this subpart? Emission Limits for Tire Production Affected Sources 63.5984 What emission limits must I meet for tire production affected sources? 63.5985 What are my alternatives for meeting the emission limits for tire production affected sources? Emission Limits for Tire Cord Production Affected Sources 63.5986 What emission limits must I meet for tire cord production affected sources? 63.5987 What are my alternatives for meeting the emission limits for tire cord production affected sources? [[Page 25]] Emission Limitations for Puncture Sealant Application Affected Sources 63.5988 What emission limitations must I meet for puncture sealant application affected sources? 63.5989 What are my alternatives for meeting the emission limitations for puncture sealant application affected sources? General Compliance Requirements 63.5990 What are my general requirements for complying with this subpart? General Testing and Initial Compliance Requirements 63.5991 By what date must I conduct an initial compliance demonstration or performance test? 63.5992 When must I conduct subsequent performance tests? 63.5993 What performance tests and other procedures must I use? Testing and Initial Compliance Requirements for Tire Production Affected Sources 63.5994 How do I conduct tests and procedures for tire production affected sources? 63.5995 What are my monitoring installation, operation, and maintenance requirements? 63.5996 How do I demonstrate initial compliance with the emission limits for tire production affected sources? Testing and Initial Compliance Requirements for Tire Cord Production Affected Sources 63.5997 How do I conduct tests and procedures for tire cord production affected sources? 63.5998 What are my monitoring installation, operation, and maintenance requirements? 63.5999 How do I demonstrate initial compliance with the emission limits for tire cord production affected sources? Testing and Initial Compliance Requirements for Puncture Sealant Application Affected Sources 63.6000 How do I conduct tests and procedures for puncture sealant application affected sources? 63.6001 What are my monitoring installation, operation, and maintenance requirements? 63.6002 How do I demonstrate initial compliance with the emission limits for puncture sealant application affected sources? Continuous Compliance Requirements for Tire Production Affected Sources 63.6003 How do I monitor and collect data to demonstrate continuous compliance with the emission limits for tire production affected sources? 63.6004 How do I demonstrate continuous compliance with the emission limits for tire production affected sources? Continuous Compliance Requirements for Tire Cord Production Affected Sources 63.6005 How do I monitor and collect data to demonstrate continuous compliance with the emission limits for tire cord production affected sources? 63.6006 How do I demonstrate continuous compliance with the emission limits for tire cord production affected sources? Continuous Compliance Requirements for Puncture Sealant Application Affected Sources 63.6007 How do I monitor and collect data to demonstrate continuous compliance with the emission limitations for puncture sealant application affected sources? 63.6008 How do I demonstrate continuous compliance with the emission limitations for puncture sealant application affected sources? Notifications, Reports, and Records 63.6009 What notifications must I submit and when? 63.6010 What reports must I submit and when? 63.6011 What records must I keep? 63.6012 In what form and how long must I keep my records? Other Requirements and Information 63.6013 What parts of the General Provisions apply to me? 63.6014 Who implements and enforces this subpart? 63.6015 What definitions apply to this subpart? Table 1 to Subpart XXXX of Part 63--Emission Limits for Tire Production Affected Sources Table 2 to Subpart XXXX of Part 63--Emission Limits for Tire Cord Production Affected Sources Table 3 to Subpart XXXX of Part 63--Emission Limits for Puncture Sealant Application Affected Sources Table 4 to Subpart XXXX of Part 63--Operating Limits for Puncture Sealant Application Control Devices Table 5 to Subpart XXXX of Part 63--Requirements for Performance Tests [[Page 26]] Table 6 to Subpart XXXX of Part 63--Initial Compliance with the Emission Limits for Tire Production Affected Sources Table 7 to Subpart XXXX of Part 63--Initial Compliance with the Emission Limits for Tire Cord Production Affected Sources Table 8 to Subpart XXXX of Part 63--Initial Compliance with the Emission Limits for Puncture Sealant Application Affected Sources Table 9 to Subpart XXXX of Part 63--Minimum Data for Continuous Compliance with the Emission Limits for Tire Production Affected Sources Table 10 to Subpart XXXX of Part 63--Continuous Compliance with the Emission Limits for Tire Production Affected Sources Table 11 to Subpart XXXX of Part 63--Minimum Data for Continuous Compliance with the Emission Limits for Tire Cord Production Affected Sources Table 12 to Subpart XXXX of Part 63--Continuous Compliance with the Emission Limits for Tire Cord Production Affected Sources Table 13 to Subpart XXXX of Part 63--Minimum Data for Continuous Compliance with the Emission Limitations for Puncture Sealant Application Affected Sources Table 14 to Subpart XXXX of Part 63--Continuous Compliance with the Emission Limitations for Puncture Sealant Application Affected Sources Table 15 to Subpart XXXX of Part 63--Requirements for Reports Table 16 to Subpart XXXX of Part 63--Selected Hazardous Air Pollutants Table 17 to Subpart XXXX of Part 63--Applicability of General Provisions to This Subpart XXXX Subpart YYYY_National Emission Standards for Hazardous Air Pollutants for Stationary Combustion Turbines What This Subpart Covers 63.6080 What is the purpose of subpart YYYY? 63.6085 Am I subject to this subpart? 63.6090 What parts of my plant does this subpart cover? 63.6092 Are duct burners and waste heat recovery units covered by subpart YYYY? 63.6095 When do I have to comply with this subpart? Emission and Operating Limitations 63.6100 What emission and operating limitations must I meet? General Compliance Requirements 63.6105 What are my general requirements for complying with this subpart? Testing and Initial Compliance Requirements 63.6110 By what date must I conduct the initial performance tests or other initial compliance demonstrations? 63.6115 When must I conduct subsequent performance tests? 63.6120 What performance tests and other procedures must I use? 63.6125 What are my monitor installation, operation, and maintenance requirements? 63.6130 How do I demonstrate initial compliance with the emission and operating limitations? Continuous Compliance Requirements 63.6135 How do I monitor and collect data to demonstrate continuous compliance? 63.6140 How do I demonstrate continuous compliance with the emission and operating limitations? Notifications, Reports, and Records 63.6145 What notifications must I submit and when? 63.6150 What reports must I submit and when? 63.6155 What records must I keep? 63.6160 In what form and how long must I keep my records? Other Requirements and Information 63.6165 What parts of the General Provisions apply to me? 63.6170 Who implements and enforces this subpart? 63.6175 What definitions apply to this subpart? Table 1 to Subpart YYYY--Emission Limitations Table 2 to Subpart YYYY--Operating Limitations Table 3 to Subpart YYYY--Requirements for Performance Tests and Initial Compliance Demonstrations Table 4 to Subpart YYYY--Initial Compliance with Emission Limitations Table 5 to Subpart YYYY--Continuous Compliance with Operating Limitations Table 6 to Subpart YYYY--Requirements for Reports Table 7 to Subpart YYYY--Applicability of General Provisions to Subpart YYYY Authority: 42 U.S.C. 7401 et seq. Source: 57 FR 61992, Dec. 29, 1992, unless otherwise noted. [[Page 27]] Source: 67 FR 40491, June 12, 2002, unless otherwise noted. What This Subpart Covers This subpart establishes national emission standards for hazardous air pollutants (NESHAP) for primary copper smelters. This subpart also establishes requirements to demonstrate initial and continuous compliance with all applicable emission limitations, work practice standards, and operation and maintenance requirements in this subpart.