[Code of Federal Regulations]

[Title 40, Volume 12]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR63.1449]



[Page 33-34]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 63_NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR 

SOURCE CATEGORIES--Table of Contents

 

Subpart QQQ_National Emission Standards for Hazardous Air Pollutants for 

                         Primary Copper Smelting

 

Sec.  63.1449  By what dates must I conduct performance tests or other 

initial compliance demonstrations?



    (a) As required in Sec.  63.7(a)(2), you must conduct a performance 

test within 180 calendar days of the compliance date that is specified 

in Sec.  63.1443 for your affected source to demonstrate initial 

compliance with each emission and opacity limit in Sec.  63.1443 and 

Sec.  63.1446 that applies to you.

    (b) For each work practice standard and operation and maintenance 

requirement that applies to you where initial compliance is not 

demonstrated



[[Page 34]]



using a performance test or opacity observation, you must demonstrate 

initial compliance within 30 calendar days after the compliance date 

that is specified for your affected source in Sec.  63.1443.