[Code of Federal Regulations]

[Title 40, Volume 12]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR63.1541]



[Page 95]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 63_NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR 

SOURCE CATEGORIES--Table of Contents

 

Subpart TTT_National Emission Standards for Hazardous Air Pollutants for 

                          Primary Lead Smelting

 

Sec.  63.1541  Applicability.



    Source: 64 FR 30204, June 4, 1999, unless othewise noted.





    (a) The provisions of this subpart apply to the following affected 

sources at primary lead smelters: sinter machine, blast furnace, dross 

furnace, process fugitive sources, and fugitive dust sources. The 

provisions of this subpart do not apply to secondary lead smelters, lead 

refiners, or lead remelters.

    (b) Table 1 of this subpart specifies the provisions of subpart A 

that apply and those that do not apply to owners and operators of 

primary lead smelters. The following sections of part 63 apply to this 

subpart as stated in subpart A and Table 1: Sec.  63.1 (Applicability), 

Sec.  63.2 (Definitions), Sec.  63.3 (Units and abbreviations), Sec.  

63.4 (Prohibited activities and circumvention), Sec.  63.5 (Construction 

and reconstruction), Sec.  63.7 (Performance testing requirements), 

Sec.  63.8 (Monitoring requirements), Sec.  63.12 (State authority and 

delegations), Sec.  63.13 (Addresses of State air pollution control 

agencies and EPA Regional Offices), Sec.  63.14 (Incorporations by 

reference), and Sec.  63.15 (Availability of information 

confidentiality). The following sections of part 63 apply to the extent 

specified in this subpart and Table 1: Sec.  63.6 (Compliance with 

standards and maintenance requirements), Sec.  63.9 (Notification 

requirements), and Sec.  63.10 (Recordkeeping and reporting 

requirements). Section Sec.  63.11 (Control device requirements) does 

not apply to this subpart.