[Code of Federal Regulations]
[Title 40, Volume 30]
[Revised as of July 1, 2006]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR761.187]

[Page 698-699]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 761_POLYCHLORINATED BIPHENYLS (PCBs) MANUFACTURING, PROCESSING, 
DISTRIBUTION IN COMMERCE, AND USE PROHIBITIONS--Table of Contents
 
                  Subpart J_General Records and Reports
 
Sec.  761.187  Reporting importers and by persons generating PCBs in 
excluded manufacturing processes.

    In addition to meeting the basic requirements of Sec.  761.1(f) and 
the definition of excluded manufacturing process

[[Page 699]]

at Sec.  761.3, PCB-generating manufacturing processes or importers of 
PCB-containing products shall be considered ``excluded manufacturing 
processes'' only when the following conditions are met:
    (a) Data are reported to the EPA by the owner/operator or importer 
concerning the total quantity of PCBs in product from excluded 
manufacturing processes leaving any manufacturing site in any calendar 
year when such quantity exceeds 0.0025 percent of that site's rated 
capacity for such manufacturing processes as of October 1, 1984; or the 
total quantity of PCBs imported in any calendar year when such quantity 
exceeds 0.0025 percent of the average total quantity of such product 
containing PCBs imported by such importer during the years 1978, 1979, 
1980, 1981 and 1982.
    (b) Data are reported to the EPA by the owner/operator concerning 
the total quantity of inadvertently generated PCBs released to the air 
from excluded manufacturing processes at any manufacturing site in any 
calendar year when such quantity exceeds 10 pounds.
    (c) Data are reported to the EPA by the owner/operator concerning 
the total quantity of inadvertently generated PCBs released to water 
from excluded manufacturing processes from any manufacturing site in any 
calendar year when such quantity exceeds 10 pounds.
    (d) These reports must be submitted to the Document Control Office 
(DCO) (7407M), Office of Pollution Prevention and Toxics (OPPT), 
Environmental Protection Agency, 1200 Pennsylvania Ave., NW., 
Washington, DC 20460-0001, ATTN: PCB Notification.

(Sec. 6, Pub. L. 94-469, 90 Stat. 2020 (15 U.S.C. 2605)

[49 FR 28192, July 10, 1984, as amended at 53 FR 12524, Apr. 15, 1988; 
58 FR 34205, June 23, 1993; 59 FR 33697, June 30, 1994; 60 FR 34465, 
July 3, 1995; 71 FR 33642, June 12, 2006]