[Code of Federal Regulations]

[Title 40, Volume 16]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR80.24]



[Page 619]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 80_REGULATION OF FUELS AND FUEL ADDITIVES--Table of Contents

 

                   Subpart B_Controls and Prohibitions

 

Sec.  80.24  Controls applicable to motor vehicle manufacturers.



    (a) [Reserved]

    (b) The manufacturer of any motor vehicle equipped with an emission 

control device which the Administrator has determined will be 

significantly impaired by the use of gasoline other than unleaded 

gasoline shall manufacture such vehicle with each gasoline tank filler 

inlet having a restriction which prevents the insertion of a nozzle with 

a spout having a terminal end with an outside diameter of 0.930 inch 

(2.363 centimeters) or more and allows the insertion of a nozzle with a 

spout meeting the specifications of Sec.  80.22(f)(2).

    (c) A motorcycle, as defined at 40 CFR 86.402 for the applicable 

model year, is exempt from the requirements of paragraph (b) of this 

section.



[38 FR 26450, Sept. 21, 1973, as amended at 39 FR 34538, Sept. 26, 1974; 

46 FR 50472, Oct. 13, 1981; 48 FR 29692, June 28, 1983; 51 FR 33731, 

Sept. 22, 1986; 61 FR 3838, Feb. 2, 1996; 61 FR 8221, Mar. 4, 1996; 61 

FR 28766, June 6, 1996; 67 FR 36771, May 24, 2002]