[Code of Federal Regulations]

[Title 40, Volume 20]

[Revised as of July 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 40CFR89.6]



[Page 45-46]

 

                   TITLE 40--PROTECTION OF ENVIRONMENT

 

         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)

 

PART 89_CONTROL OF EMISSIONS FROM NEW AND IN-USE NONROAD 

COMPRESSION-IGNITION ENGINES--Table of Contents

 

                            Subpart A_General

 

Sec.  89.6  Reference materials.



    (a) Incorporation by reference. The documents in paragraph (b) of 

this section have been incorporated by reference. The incorporation by 

reference was approved by the Director of the Federal Register in 

accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be 

inspected at US EPA, OAR, 1200 Pennsylvania Ave., NW., Washington, DC 

20460, or at the National Archives and Records Administration (NARA). 

For information on the availability of this material at NARA, call 202-

741-6030, or go to: http://www.archives.gov/federal--register/code--of--

federal--regulations/ibr--locations.html.

    (b) The following paragraphs and tables set forth the material that 

has been incorporated by reference in this part.

    (1) ASTM material. The following table sets forth material from the 

American Society for Testing and Materials which has been incorporated 

by reference. The first column lists the number and name of the 

material. The second column lists the section(s) of this part, other 

than Sec.  89.6, in which the matter is referenced. The second column is 

presented for information only and may not be all inclusive. Copies of 

these materials may be obtained from American Society for Testing and 

Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.



[[Page 46]]







------------------------------------------------------------------------

           Document number and name             40 CFR part 89 reference

------------------------------------------------------------------------

ASTM D86-97:

    ``Standard Test Method for Distillation    Appendix A to Subpart D.

     of Petroleum Products at Atmospheric

     Pressure''.

ASTM D93-97:

    ``Standard Test Methods for Flash Point    Appendix A to Subpart D.

     by Pensky-Martens Closed Cup Tester''.

ASTM D129-95:

    ``Standard Test Method for Sulfur in       Appendix A to Subpart D.

     Petroleum Products (General Bomb

     Method)''.

ASTM D287-92:

    ``Standard Test Method for API Gravity of  Appendix A to Subpart D

     Crude Petroleum and Petroleum Products''

     (Hydrometer Method).

ASTM D445-97:

    ``Standard Test Method for Kinematic       Appendix A to Subpart D.

     Viscosity of Transparent and Opaque

     Liquids (the Calculation of Dynamic

     Viscosity)''.

ASTM D613-95:

    ``Standard Test Method for Cetane Number   Appendix A to Subpart D.

     of Diesel Fuel Oil''.

ASTM D1319-98:

    ``Standard Test Method for Hydrocarbon     Appendix A to Subpart D.

     Types in Liquid Petroleum Products by

     Fluorescent Indicator Adsorption''.

ASTM D2622-98:

    ``Standard Test Method for Sulfur in       Appendix A to Subpart D.

     Petroleum Products by Wavelength

     Dispersive X-ray Fluorescence

     Spectrometry''.

ASTM D5186-96:

    ``Standard Test Method for                 Appendix A to Subpart D.

     ``Determination of the Aromatic Content

     and Polynuclear Aromatic Content of

     Diesel Fuels and Aviation Tubine Fuels

     By Supercritical Fluid Chromatography''.

ASTM E29-93a:

    ``Standard Practice for Using Significant  89.120; 89.207; 89.509.

     Digits in Test Data to Determine

     Conformance with Specifications''.

------------------------------------------------------------------------





[59 FR 31335, June 17, 1994, as amended at 63 FR 56997, Oct. 23, 1998]