[Code of Federal Regulations]
[Title 49, Volume 2]
[Revised as of October 1, 2006]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR178.33-9]

[Page 830]
 
                        TITLE 49--TRANSPORTATION
 
   CHAPTER I--PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, 
                      DEPARTMENT OF TRANSPORTATION
 
PART 178_SPECIFICATIONS FOR PACKAGINGS--Table of Contents
 
       Subpart B_Specifications for Inside Containers, and Linings
 
Sec.  178.33-9  Marking.

    (a) By means of printing, lithographing, embossing, or stamping, 
each container must be marked to show:
    (1) DOT-2P.
    (2) Name or symbol of person making the mark specified in paragraph 
(a)(1) of this section. Symbol, if used, must be registered with the 
Associate Administrator.
    (b) [Reserved]

[Amdt. 178-40, 41 FR 38181, Sept. 9, 1976, as amended by Amdt. 178-97, 
56 FR 66287, Dec. 20, 1991; 66 FR 45386, Aug. 28, 2001]