[Code of Federal Regulations]

[Title 49, Volume 4]

[Revised as of October 1, 2006]

From the U.S. Government Printing Office via GPO Access

[CITE: 49CFR230.46]



[Page 443]

 

                        TITLE 49--TRANSPORTATION

 

       CHAPTER II--FEDERAL RAILROAD ADMINISTRATION, DEPARTMENT OF 

                             TRANSPORTATION

 

PART 230_STEAM LOCOMOTIVE INSPECTION AND MAINTENANCE STANDARDS--Table 

 

                   Subpart B_Boilers and Appurtenances

 

Sec.  230.46  Badge plates.



    A metal badge plate showing the allowed steam pressure shall be 

attached to the boiler backhead in the cab. If boiler backhead is 

lagged, the lagging and jacket shall be cut away so that the plate can 

be seen.