[Code of Federal Regulations] [Title 49, Volume 6] [Revised as of October 1, 2006] From the U.S. Government Printing Office via GPO Access [CITE: 49CFR555.6] [Page 156-158] TITLE 49--TRANSPORTATION CHAPTER V--NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION PART 555_TEMPORARY EXEMPTION FROM MOTOR VEHICLE SAFETY AND BUMPER STANDARDS--Table of Contents Subpart A_General Sec. 555.6 Basis for application. (a) If the basis of the application is that compliance with the standard would cause substantial economic hardship to a manufacturer that has tried to comply with the standard in good faith, the applicant shall provide the following information: (1) Engineering and financial information demonstrating in detail how compliance or failure to obtain an exemption would cause substantial economic hardship, including-- (i) A list or description of each item of motor vehicle equipment that would have to be modified in order to achieve compliance; (ii) The itemized estimated cost to modify each such item of motor vehicle equipment if compliance were to be achieved-- (A) As soon as possible, (B) At the end of a 1-year exemption period (if the petition is for 1 year or more), (C) At the end of a 2-year exemption period (if the petition is for 2 years or more), (D) At the end of a 3-year exemption period (if the petition is for 3 years), (iii) The estimated price increase per vehicle to balance the total costs incurred pursuant to paragraph (a)(1)(ii) of this section and a statement of the anticipated effect of each such price increase; (iv) Corporate balance sheets and income statements for the three fiscal years immediately preceding the filing of the application; (v) Projected balance sheet and income statement for the fiscal year following a denial of the application; and (vi) A discussion of any other hardships (e.g., loss of market, difficulty of obtaining goods and services for compliance) that the petitioner desires the agency to consider. (2) A description of its efforts to comply with the standards, including-- (i) A chronological analysis of such efforts showing its relationship to the rule making history of the standard from which exemption is sought; (ii) A discussion of alternate means of compliance considered and the reasons for rejection of each; (iii) A discussion of any other factors (e.g., the resources available to the petitioner, inability to procure goods and services necessary for compliance following a timely request) that the petitioner desires the NHTSA to consider in deciding whether the petitioner [[Page 157]] tried in good faith to comply with the standard; (iv) A description of the steps to be taken, while the exemption is in effect, and the estimated date by which full compliance will be achieved either by design changes or termination of production of nonconforming vehicles; and (v) The total number of motor vehicles produced by or on behalf of the petitioner in the 12-month period prior to filing the petition, and the inclusive dates of the period. (49 U.S.C. 30113(d) limits eligibility for exemption on the basis of economic hardship to manufacturers whose total motor vehicle production in the year preceding the filing of their applications does not exceed 10,000.) (b) If the basis of the application is that the exemption would make easier the development or field evaluation of a new motor vehicle safety or impact protection features providing a safety or impact protection level at least equal to that of the standard, the applicant shall provide the following information: (1) A description of the safety or impact protection features, and research, development, and testing documentation establishing the innovational nature of such features. (2) An analysis establishing that the level of safety or impact protection of the feature is equivalent to or exceeds the level of safety or impact protection established in the standard from which exemption is sought, including-- (i) A detailed description of how a vehicle equipped with the safety or impact protection feature differs from one that complies with the standard; (ii) If applicant is presently manufacturing a vehicle conforming to the standard, the results of tests conducted to substantiate certification to the standard; and (iii) The results of tests conducted on the safety or impact protection features that demonstrates performance which meets or exceeds the requirements of the standard. (3) Substantiation that a temporary exemption would facilitate the development or field evaluation of the vehicle. (4) A statement whether, at the end of the exemption period, the manufacturer intends to conform to the standard, apply for a further exemption, or petition for rulemaking to amend the standard to incorporate the safety or impact protection features. (5) A statement that not more than 2,500 exempted vehicles will be sold in the United States in any 12-month period for which an exemption may be granted pursuant to this paragraph. An application for renewal of such an exemption shall also include the total number of exempted vehicles sold in the United States under the existing exemption. (c) If the basis of the application is that the exemption would make the development or field evaluation of a low-emission vehicle easier and would not unreasonably lower the safety or impact protection level of that vehicle, the applicant shall provide-- (1) Substantiation that the vehicle is a low-emission vehicle as defined by 49 U.S.C. 30113(a). (2) Research, development, and testing documentation establishing that a temporary exemption would not unreasonably degrade the safety or impact protection of the vehicle, including-- (i) A detailed description of how the motor vehicle equipped with the low-emission engine would, if exempted, differ from one that complies with the standard; (ii) If the applicant is presently manufacturing a vehicle conforming to the standard, the results of tests conducted to substantiate certification to the standard; (iii) The results of any tests conducted on the vehicle that demonstrate its failure to meet the standard, expressed as comparative performance levels; and (iv) Reasons why the failure to meet the standard does not unreasonably degrade the safety or impact protection of the vehicle. (3) Substantiation that a temporary exemption would facilitate the development or field evaluation of the vehicle. (4) A statement whether, at the end of the exemption period, the manufacturer intends to conform with the standard. (5) A statement that not more than 2,500 exempted vehicles will be sold in [[Page 158]] the United States in any 12-month period for which an exemption may be granted pursuant to this paragraph. An application for renewal of an exemption shall also include the total number of exempted vehicles sold in the United States under the existing exemption. (d) If the basis of the application is that the applicant is otherwise unable to sell a vehicle whose overall level of safety or impact protection is at least equal to that of a nonexempted vehicle, the applicant shall provide-- (1) A detailed analysis of how the vehicle provides the overall level of safety or impact protection at least equal to that of nonexempted vehicles, including-- (i) A detailed description of how the motor vehicle, if exempted, differs from one that conforms to the standard; (ii) A detailed description of any safety or impact protection features that the vehicle offers as standard equipment that are not required by the Federal motor vehicle safety or bumper standards; (iii) The results of any tests conducted on the vehicle demonstrating that it fails to meet the standard, expressed as comparative performance levels; (iv) The results of any tests conducted on the vehicle demonstrating that its overall level of safety or impact protection exceeds that which is achieved by conformity to the standards. (v) Other arguments that the overall level of safety or impact protection of the vehicle is at least equal to that of nonexempted vehicles. (2) Substantiation that compliance would prevent the sale of the vehicle. (3) A statement whether, at the end of the exemption period, the manufacturer intends to comply with the standard. (4) A statement that not more than 2,500 exempted vehicles will be sold in the United States in any 12-month period for which an exemption may be granted pursuant to this paragraph. An application for renewal of any exemption shall also include the total number of exempted vehicles sold in the United States under the existing exemption. [38 FR 2694, Jan. 29, 1973, as amended at 39 FR 5489, Feb. 13, 1974; 63 FR 44173, Aug. 18, 1998; 64 FR 2861, Jan. 19, 1999]