[Code of Federal Regulations]
[Title 49, Volume 6]
[Revised as of October 1, 2006]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR569.9]

[Page 193]
 
                        TITLE 49--TRANSPORTATION
 
                   CHAPTER V--NATIONAL HIGHWAY TRAFFIC
                    SAFETY ADMINISTRATION, DEPARTMENT
                            OF TRANSPORTATION
 
PART 569_REGROOVED TIRES--Table of Contents
 
Sec.  569.9  Labeling of regroovable tires.

    (a) Regroovable tires. After August 30, 1969, each tire designed and 
constructed for regrooving shall be labeled on both sidewalls with the 
word ``Regroovable'' molded on or into the tire in raised or recessed 
letters 0.025 to 0.040 inch. The word ``Regroovable'' shall be in 
letters 0.38 to 0.50 inch in height and not less than 4 inches and not 
more than 6 inches in length. The lettering shall be located in the 
sidewall of the tire between the maximum section width and the bead in 
an area which will not be obstructed by the rim flange.

[34 FR 1150, Jan. 24, 1969; 34 FR 1830, Feb. 7, 1969]