[Code of Federal Regulations]
[Title 49, Volume 6]
[Revised as of October 1, 2006]
From the U.S. Government Printing Office via GPO Access
[CITE: 49CFR572.100]

[Page 953]
 
                        TITLE 49--TRANSPORTATION
 
                   CHAPTER V--NATIONAL HIGHWAY TRAFFIC
                    SAFETY ADMINISTRATION, DEPARTMENT
                            OF TRANSPORTATION
 
PART 572_ANTHROPOMORPHIC TEST DEVICES--Table of Contents
 
                     Subpart L_Free Motion Headform
 
Sec.  572.100  Incorporation by Reference.

    Source: 60 FR 43058, Aug. 18, 1995, unless otherwise noted.


    (a) The drawings and specifications referred to in Sec.  572.101 are 
hereby incorporated in subpart L by reference. These materials are 
thereby made part of this regulation. The Director of the Federal 
Register approved the materials incorporated by reference in accordance 
with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of the materials may be 
inspected at NHTSA's Docket Section, 400 Seventh Street, S.W., room 
5109, Washington, DC, or at the National Archives and Records 
Administration (NARA). For information on the availability of this 
material at NARA, call 202-741-6030, or go to: http://www.archives.gov/
federal--register/code--of--federal--regulations/ibr--locations.html.
    (b) The incorporated material is available as follows:
    (1) Drawing number 92041-001, ``Head Form Assembly,'' (November 30, 
1992); drawing number 92041-002, ``Skull Assembly,'' (November 30, 
1992); drawing number 92041-003, ``Skull Cap Plate Assembly,'' (November 
30, 1992); drawing number 92041-004, ``Skull Cap Plate,'' (November 30, 
1992); drawing number 92041-005, ``Threaded Pin,'' (November 30, 1992); 
drawing number 92041-006, ``Hex Nut,'' (November 30, 1992); drawing 
number 92041-008, ``Head Skin without Nose,'' (November 30, 1992, as 
amended March 6, 1995); drawing number 92041-009, ``Six-Axis Load Cell 
Simulator Assembly,'' (November 30, 1992); drawing number 92041-011, 
``Head Ballast Weight,'' (November 30, 1992); drawing number 92041-018, 
``Head Form Bill of Materials,'' (November 30, 1992); drawing number 
78051-148, ``Skull-Head (cast) Hybrid III,'' (May 20, 1978, as amended 
August 17, 1978); drawing number 78051-228/78051-229, ``Skin- Hybrid 
III,'' (May 20, 1978, as amended through September 24, 1979); drawing 
number 78051-339, ``Pivot Pin-Neck Transducer,'' (May 20, 1978, as 
amended May 14, 1986); drawing number 78051-372, ``Vinyl Skin 
Formulation Hybrid III,'' (May 20, 1978); and drawing number C-1797, 
``Neck Blank, (August 1, 1989); drawing number SA572-S4, ``Accelerometer 
Specification,'' (November 30, 1992), are available from Reprographic 
Technologies, 1111 14th Street, N.W., Washington, DC 20005.
    (2) A user's manual entitled ``Free-Motion Headform User's Manual,'' 
version 2, March 1995, is available from NHTSA's Docket Section at the 
address in paragraph (a) of this section.
    (3) SAE Recommended Practice J211, OCT 1988, ``Instrumentation for 
Impact Tests,'' Class 1000, is available from The Society of Automotive 
Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096.