[Code of Federal Regulations]
[Title 21, Volume 3]
[Revised as of January 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 21CFR173.10]

[Page 121-122]
 
                        TITLE 21--FOOD AND DRUGS
 
CHAPTER I--FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN 
                          SERVICES (CONTINUED)
 
PART 173_SECONDARY DIRECT FOOD ADDITIVES PERMITTED IN FOOD FOR HUMAN 
 
  Subpart A_Polymer Substances and Polymer Adjuvants for Food Treatment
 
Sec.  173.10  Modified polyacrylamide resin.

    Modified polyacrylamide resin may be safely used in food in 
accordance

[[Page 122]]

with the following prescribed conditions:
    (a) The modified polyacrylamide resin is produced by the 
copolymerization of acrylamide with not more than 5-mole percent [beta]-
methacrylyloxyethy-ltrimethylammonium methyl sulfate.
    (b) The modified polyacrylamide resin contains not more than 0.05 
percent residual acrylamide.
    (c) The modified polyacrylamide resin is used as a flocculent in the 
clarification of beet or cane sugar juice in an amount not exceeding 5 
parts per million by weight of the juice.
    (d) To assure safe use of the additive, the label and labeling of 
the additive shall bear, in addition to the other information required 
by the act, adequate directions to assure use in compliance with 
paragraph (c) of this section.