[Code of Federal Regulations]
[Title 24, Volume 5]
[Revised as of January 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 24CFR3282.205]

[Page 221-222]
 
                 TITLE 24--HOUSING AND URBAN DEVELOPMENT
 
 CHAPTER XX--OFFICE OF ASSISTANT SECRETARY FOR HOUSING--FEDERAL HOUSING 
        COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT
 
PART 3282_MANUFACTURED HOME PROCEDURAL AND ENFORCEMENT REGULATIONS--
 
    Subpart E_Manufacturer Inspection and Certification Requirements
 
Sec.  3282.205  Certification requirements.

    (a) Every manufacturer shall make a record of the serial number of 
each manufactured home produced, and a duly authorized representative of 
the manufacturer shall certify that each manufactured home has been 
constructed in accordance with the Federal standards. The manufacturer 
shall furnish a copy of that certification to the IPIA for the purpose 
of determining which manufactured homes are subject to the notification 
and correction requirements of subpart I of this part.
    (b) Every manufacturer of manufactured homes shall certify on the 
data plate as set out in Sec.  3280.5 of chapter XX of 24 CFR and Sec.  
3282.362(c)(3) that the manufactured home is designed to comply with the 
Federal manufactured

[[Page 222]]

home construction and safety standards in force at the time of 
manufacture in addition to providing other information required to be 
completed on the data plate.
    (c) Every manufacturer of manufactured homes shall furnish to the 
dealer or distributor of each of its manufactured homes a certification 
that such manufactured home, to the best of the manufacturer's knowledge 
and belief, conforms to all applicable Federal construction and safety 
standards. This certification shall be in the form of the label provided 
by the IPIA under Sec.  3282.362(c)(2). The label shall be affixed only 
at the end of the last stage of production of the manufactured home.
    (d) The manufacturer shall apply a label required or allowed by the 
regulations in this part only to a manufactured home that the 
manufacturer knows by its inspections to be in compliance with the 
standards.

[41 FR 19852, May 13, 1976, as amended at 41 FR 24970, June 21, 1976; 61 
FR 10860, Mar. 15, 1996]