[Code of Federal Regulations]
[Title 14, Volume 1]
[Revised as of January 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 14CFR45.27]

[Page 907-908]
 
                     TITLE 14--AERONAUTICS AND SPACE
 
CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION
 
PART 45_IDENTIFICATION AND REGISTRATION MARKING--Table of Contents
 
              Subpart C_Nationality and Registration Marks
 
Sec.  45.27  Location of marks; nonfixed-wing aircraft.

    (a) Rotorcraft. Each operator of a rotorcraft shall display on that 
rotorcraft horizontally on both surfaces of the cabin, fuselage, boom, 
or tail the marks required by Sec.  45.23.

[[Page 908]]

    (b) Airships. Each operator of an airship shall display on that 
airship the marks required by Sec.  45.23, horizontally on--
    (1) The upper surface of the right horizontal stabilizer and on the 
under surface of the left horizontal stabilizer with the top of the 
marks toward the leading edge of each stabilizer; and
    (2) Each side of the bottom half of the vertical stabilizer.
    (c) Spherical balloons. Each operator of a spherical balloon shall 
display the marks required by Sec.  45.23 in two places diametrically 
opposite and near the maximum horizontal circumference of that balloon.
    (d) Nonspherical balloons. Each operator of a nonspherical balloon 
shall display the marks required by Sec.  45.23 on each side of the 
balloon near its maximum cross section and immediately above either the 
rigging band or the points of attachment of the basket or cabin 
suspension cables.
    (e) Powered parachute and weight-shift-control aircraft. Each 
operator of a powered parachute or a weight-shift-control aircraft must 
display the marks required by Sec.  45.23. The marks must be displayed 
horizontally and in two diametrically opposite positions on any fuselage 
structural member.

[Doc. No. 2047, 29 FR 3223, Mar. 11, 1964, as amended by Amdt. 45-15, 48 
FR 11392, Mar. 17, 1983; Amdt. 45-24, 69 FR 44863, July 27, 2004]