[Code of Federal Regulations]
[Title 14, Volume 2]
[Revised as of January 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 14CFR60.33]

[Page 15-16]
 
                     TITLE 14--AERONAUTICS AND SPACE
 
CHAPTER I--FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION 
                               (CONTINUED)
 
PART 60_FLIGHT SIMULATION TRAINING DEVICE INITIAL AND CONTINUING 
QUALIFICATION AND USE--Table of Contents
 
Sec.  60.33  Applications, logbooks, reports, and records: Fraud, 
falsification, or incorrect statements.

    (a) No person may make, or cause to be made, any of the following:
    (1) A fraudulent or intentionally false statement in any application 
or any amendment thereto, or any other report or test result required by 
this part.
    (2) A fraudulent or intentionally false statement in or a known 
omission from any record or report that is kept, made, or used to show 
compliance with this part, or to exercise any privileges under this 
chapter.

[[Page 16]]

    (3) Any reproduction or alteration, for fraudulent purpose, of any 
report, record, or test result required under this part.
    (b) The commission by any person of any act prohibited under 
paragraph (a) of this section is a basis for any one or any combination 
of the following:
    (1) A civil penalty.
    (2) Suspension or revocation of any certificate held by that person 
that was issued under this chapter.
    (3) The removal of FSTD qualification and approval for use in a 
training program.
    (c) The following may serve as a basis for removal of qualification 
of an FSTD including the withdrawal of approval for use of an FSTD; or 
denying an application for a qualification:
    (1) An incorrect statement, upon which the FAA relied or could have 
relied, made in support of an application for a qualification or a 
request for approval for use.
    (2) An incorrect entry, upon which the FAA relied or could have 
relied, made in any logbook, record, or report that is kept, made, or 
used to show compliance with any requirement for an FSTD qualification 
or an approval for use.