[Code of Federal Regulations]
[Title 40, Volume 31]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1048.10]

[Page 551-552]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD 
SPARK-IGNITION ENGINES--Table of Contents
 
                  Subpart A_Overview and Applicability
 
Sec.  1048.10  How is this part organized?

    The regulations in this part 1048 contain provisions that affect 
both engine manufacturers and others. However, the requirements of this 
part are generally addressed to the engine manufacturer. The term 
``you'' generally means the engine manufacturer, as defined in Sec.  
1048.801. This part 1048 is divided into the following subparts:
    (a) Subpart A of this part defines the applicability of part 1048 
and gives an overview of regulatory requirements.
    (b) Subpart B of this part describes the emission standards and 
other requirements that must be met to certify engines under this part. 
Note that Sec.  1048.145 discusses certain interim requirements and 
compliance provisions that apply only for a limited time.
    (c) Subpart C of this part describes how to apply for a certificate 
of conformity.

[[Page 552]]

    (d) Subpart D of this part describes general provisions for testing 
production-line engines.
    (e) Subpart E of this part describes general provisions for testing 
in-use engines.
    (f) Subpart F of this part describes how to test your engines 
(including references to other parts of the Code of Federal 
Regulations).
    (g) Subpart G of this part and 40 CFR part 1068 describe 
requirements, prohibitions, and other provisions that apply to engine 
manufacturers, equipment manufacturers, owners, operators, rebuilders, 
and all others.
    (h) [Reserved]
    (i) Subpart I of this part contains definitions and other reference 
information.

[70 FR 40465, July 13, 2005]