[Code of Federal Regulations]
[Title 40, Volume 31]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1048.20]

[Page 552]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD 
SPARK-IGNITION ENGINES--Table of Contents
 
                  Subpart A_Overview and Applicability
 
Sec.  1048.20  What requirements from this part apply to excluded stationary engines?

    (a) You must add a permanent label or tag to each new engine you 
produce or import that is excluded under Sec.  1048.1(c) as a stationary 
engine. To meet labeling requirements, you must do the following things:
    (1) Attach the label or tag in one piece so no one can remove it 
without destroying or defacing it.
    (2) Secure it to a part of the engine needed for normal operation 
and not normally requiring replacement.
    (3) Make sure it is durable and readable for the engine's entire 
life.
    (4) Write it in English.
    (5) Follow the requirements in Sec.  1048.135(g) regarding duplicate 
labels if the engine label is obscured in the final installation.
    (b) Engine labels or tags required under this section must have the 
following information:
    (1) Include the heading ``EMISSION CONTROL INFORMATION''.
    (2) Include your full corporate name and trademark. You may instead 
include the full corporate name and trademark of another company you 
choose to designate.
    (3) State the engine displacement (in liters) and maximum engine 
power.
    (4) State: ``THIS ENGINE IS EXCLUDED FROM THE REQUIREMENTS OF 40 CFR 
PART 1048 AS A ``STATIONARY ENGINE.'' INSTALLING OR USING THIS ENGINE IN 
ANY OTHER APPLICATION MAY BE A VIOLATION OF FEDERAL LAW SUBJECT TO CIVIL 
PENALTY.''.

[70 FR 40466, July 13, 2005]