[Code of Federal Regulations]
[Title 40, Volume 31]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1048.325]

[Page 574]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1048_CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD 
SPARK-IGNITION ENGINES--Table of Contents
 
                Subpart D_Testing Production-line Engines
 
Sec.  1048.325  What happens if an engine family fails the production-line 
requirements?

    (a) We may suspend your certificate of conformity for an engine 
family if it fails under Sec.  1048.315. The suspension may apply to all 
facilities producing engines from an engine family, even if you find 
noncompliant engines only at one facility.
    (b) We will tell you in writing if we suspend your certificate in 
whole or in part. We will not suspend a certificate until at least 15 
days after the engine family fails. The suspension is effective when you 
receive our notice.
    (c) Up to 15 days after we suspend the certificate for an engine 
family, you may ask for a hearing (see Sec.  1048.820). If we agree 
before a hearing that we used erroneous information in deciding to 
suspend the certificate, we will reinstate the certificate.
    (d) Section 1048.335 specifies steps you must take to remedy the 
cause of the engine family's production-line failure. All the engines 
you have produced since the end of the last test period are presumed 
noncompliant and should be addressed in your proposed remedy. We may 
require you to apply the remedy to engines produced earlier if we 
determine that the cause of the failure is likely to have affected the 
earlier engines.

[67 FR 68347, Nov. 8, 2002, as amended at 70 FR 40475, July 13, 2005]