[Code of Federal Regulations]
[Title 40, Volume 31]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1065.205]

[Page 701-702]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1065_ENGINE-TESTING PROCEDURES--Table of Contents
 
                    Subpart C_Measurement Instruments
 
Sec.  1065.205  Performance specifications for measurement instruments.

    Your test system as a whole must meet all the applicable 
calibrations, verifications, and test-validation criteria specified in 
subparts D and F of this part or subpart J of this part for using PEMS 
and for performing field testing. We recommend that your instruments 
meet the specifications in Table 1 of this section for all ranges you 
use for testing. We also recommend that you keep any documentation you 
receive from instrument manufacturers showing that your instruments meet 
the specifications in Table 1 of this section.

[[Page 702]]

[GRAPHIC] [TIFF OMITTED] TR13JY05.020

         Measurement of Engine Parameters and Ambient Conditions