[Code of Federal Regulations]
[Title 40, Volume 31]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR1065.248]

[Page 708]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 1065_ENGINE-TESTING PROCEDURES--Table of Contents
 
                    Subpart C_Measurement Instruments
 
Sec.  1065.248  Gas divider.

    (a) Application. You may use a gas divider to blend calibration 
gases.
    (b) Component requirements. Use a gas divider that blends gases to 
the specifications of Sec.  1065.750 and to the flow-weighted 
concentrations expected during testing. You may use critical-flow gas 
dividers, capillary-tube gas dividers, or thermal-mass-meter gas 
dividers. Note that your overall gas-divider system must meet the 
linearity verification in Sec.  1065.307.

                   CO and CO2 Measurements