[Code of Federal Regulations]
[Title 40, Volume 25]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR262.108]
[Page 242-250]
TITLE 40--PROTECTION OF ENVIRONMENT
CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
PART 262_STANDARDS APPLICABLE TO GENERATORS OF HAZARDOUS WASTE--Table of
Subpart J_University Laboratories XL Project_Laboratory Environmental
Sec. 262.108 When will this subpart expire?
This subpart will expire on April 15, 2009.
[71 FR 35550, June 21, 2006]
Appendix to Part 262--Uniform Hazardous Waste Manifest and Instructions
(EPA Forms 8700-22 and 8700-22A and Their Instructions)
U.S. EPA Form 8700-22
Read all instructions before completing this form.
1. This form has been designed for use on a 12-pitch (elite)
typewriter which is also compatible with standard computer printers; a
firm point pen may also be used--press down hard.
2. Federal regulations require generators and transporters of
hazardous waste and owners or operators of hazardous waste treatment,
storage, and disposal facilities to complete this form (FORM 8700-22)
and, if necessary, the continuation sheet (FORM 8700-22A) for both
inter- and intrastate transportation of hazardous waste.
[[Page 243]]
[GRAPHIC] [TIFF OMITTED] TR16JN05.012
Manifest 8700-22
The following statement must be included with each Uniform Hazardous
Waste Manifest, either on the form, in the instructions to the form, or
accompanying the form:
Public reporting burden for this collection of information is
estimated to average: 30 minutes for generators, 10 minutes for
transporters, and 25 minutes for owners or operators of treatment,
storage, and disposal facilities. This includes time for reviewing
instructions, gathering data, completing, reviewing and transmitting the
form. Any correspondence regarding the PRA burden statement for the
manifest must be sent to
[[Page 244]]
the Director of the Collection Strategies Division in EPA's Office of
Information Collection at the following address: U.S. Environmental
Protection Agency (2822T), 1200 Pennsylvania Ave., NW., Washington, DC
20460. Do not send the completed form to this address.
I. Instructions for Generators
Manifest 8700-22
The following statement must be included with each Uniform Hazardous
Waste Manifest, either on the form, in the instructions to the form, or
accompanying the form:
Public reporting burden for this collection of information is
estimated to average: 30 minutes for generators, 10 minutes for
transporters, and 25 minutes for owners or operators of treatment,
storage, and disposal facilities. This includes time for reviewing
instructions, gathering data, completing, reviewing and transmitting the
form. Send comments regarding the burden estimate, including suggestions
for reducing this burden, to: Chief, Information Policy Branch (2136),
U.S. Environmental Protection Agency, Ariel Rios Building; 1200
Pennsylvania Ave., NW., Washington, DC 20460; and to the Office of
Information and Regulatory Affairs, Office of Management and Budget,
Washington, DC 20503.
I. Instructions for Generators
Item 1. Generator's U.S. EPA Identification Number
Enter the generator's U.S. EPA twelve digit identification number,
or the State generator identification number if the generator site does
not have an EPA identification number.
Item 2. Page 1 of --
Enter the total number of pages used to complete this Manifest
(i.e., the first page (EPA Form 8700-22) plus the number of Continuation
Sheets (EPA Form 8700-22A), if any).
Item 3. Emergency Response Phone Number
Enter a phone number for which emergency response information can be
obtained in the event of an incident during transportation. The
emergency response phone number must:
1. Be the number of the generator or the number of an agency or
organization who is capable of and accepts responsibility for providing
detailed information about the shipment;
2. Reach a phone that is monitored 24 hours a day at all times the
waste is in transportation (including transportation related storage);
and
3. Reach someone who is either knowledgeable of the hazardous waste
being shipped and has comprehensive emergency response and spill
cleanup/incident mitigation information for the material being shipped
or has immediate access to a person who has that knowledge and
information about the shipment.
Note: Emergency Response phone number information should only be
entered in Item 3 when there is one phone number that applies to all the
waste materials described in Item 9b. If a situation (e.g., consolidated
shipments) arises where more than one Emergency Response phone number
applies to the various wastes listed on the manifest, the phone numbers
associated with each specific material should be entered after its
description in Item 9b.
Item 4. Manifest Tracking Number
This unique tracking number must be pre-printed on the manifest by
the forms printer.
Item 5. Generator's Mailing Address, Phone Number and Site Address
Enter the name of the generator, the mailing address to which the
completed manifest signed by the designated facility should be mailed,
and the generator's telephone number. Note, the telephone number
(including area code) should be the normal business number for the
generator, or the number where the generator or his authorized agent may
be reached to provide instructions in the event the designated and/or
alternate (if any) facility rejects some or all of the shipment. Also
enter the physical site address from which the shipment originates only
if this address is different than the mailing address.
Item 6. Transporter 1 Company Name, and U.S. EPA ID Number
Enter the company name and U.S. EPA ID number of the first
transporter who will transport the waste. Vehicle or driver information
may not be entered here.
Item 7. Transporter 2 Company Name and U.S. EPA ID Number
If applicable, enter the company name and U.S. EPA ID number of the
second transporter who will transport the waste. Vehicle or driver
information may not be entered here.
If more than two transporters are needed, use a Continuation
Sheet(s) (EPA Form 8700-22A).
Item 8. Designated Facility Name, Site Address, and U.S. EPA ID Number
Enter the company name and site address of the facility designated
to receive the waste listed on this manifest. Also enter the facility's
phone number and the U.S. EPA
[[Page 245]]
twelve digit identification number of the facility.
Item 9. U.S. DOT Description (Including Proper Shipping Name, Hazard
Class or Division, Identification Number, and Packing Group)
Item 9a. If the wastes identified in Item 9b consist of both
hazardous and nonhazardous materials, then identify the hazardous
materials by entering an ``X'' in this Item next to the corresponding
hazardous material identified in Item 9b.
If applicable, enter the name of the person accepting the waste on
behalf of the second transporter. That person must acknowledge
acceptance of the waste described on the manifest by signing and
entering the date of receipt.
Item 9b. Enter the U.S. DOT Proper Shipping Name, Hazard Class or
Division, Identification Number (UN/NA) and Packing Group for each waste
as identified in 49 CFR 172. Include technical name(s) and reportable
quantity references, if applicable.
Note: If additional space is needed for waste descriptions, enter
these additional descriptions in Item 27 on the Continuation Sheet (EPA
Form 8700-22A). Also, if more than one Emergency Response phone number
applies to the various wastes described in either Item 9b or Item 27,
enter applicable Emergency Response phone numbers immediately following
the shipping descriptions for those Items.
Item 10. Containers (Number and Type)
Enter the number of containers for each waste and the appropriate
abbreviation from Table I (below) for the type of container.
Table I--Types of Containers
BA = Burlap, cloth, paper, or plastic bags.
CF = Fiber or plastic boxes, cartons, cases.
CM = Metal boxes, cartons, cases (including roll-offs).
CW = Wooden boxes, cartons, cases.
CY = Cylinders.
DF = Fiberboard or plastic drums, barrels, kegs.
DM = Metal drums, barrels, kegs.
DT = Dump truck.
DW = Wooden drums, barrels, kegs.
HG = Hopper or gondola cars.
TC = Tank cars.
TP = Portable tanks.
TT = Cargo tanks (tank trucks).
Item 11. Total Quantity
Enter, in designated boxes, the total quantity of waste. Round
partial units to the nearest whole unit, and do not enter decimals or
fractions. To the extent practical, report quantities using appropriate
units of measure that will allow you to report quantities with
precision. Waste quantities entered should be based on actual
measurements or reasonably accurate estimates of actual quantities
shipped. Container capacities are not acceptable as estimates.
Item 12. Units of Measure (Weight/Volume)
Enter, in designated boxes, the appropriate abbreviation from Table
II (below) for the unit of measure.
Table II--Units of Measure
G = Gallons (liquids only).
K = Kilograms.
L = Liters (liquids only).
M = Metric Tons (1000 kilograms).
N = Cubic Meters.
P = Pounds.
T = Tons (2000 pounds).
Y = Cubic Yards.
Note: Tons, Metric Tons, Cubic Meters, and Cubic Yards should only be
reported in connection with very large bulk shipments, such as rail
cars, tank trucks, or barges.
Item 13. Waste Codes
Enter up to six federal and state waste codes to describe each waste
stream identified in Item 9b. State waste codes that are not redundant
with federal codes must be entered here, in addition to the federal
waste codes which are most representative of the properties of the
waste.
Item 14. Special Handling Instructions and Additional Information.
1. Generators may enter any special handling or shipment-specific
information necessary for the proper management or tracking of the
materials under the generator's or other handler's business processes,
such as waste profile numbers, container codes, bar codes, or response
guide numbers. Generators also may use this space to enter additional
descriptive information about their shipped materials, such as chemical
names, constituent percentages, physical state, or specific gravity of
wastes identified with volume units in Item 12.
2. This space may be used to record limited types of federally
required information for which there is no specific space provided on
the manifest, including any alternate facility designations; the
manifest tracking number of the original manifest for rejected wastes
and residues that are re-shipped under a second manifest; and the
specification of PCB waste descriptions and PCB out-of-service dates
required under 40 CFR 761.207. Generators, however, cannot be required
to enter information in this space to meet state regulatory
requirements.
Item 15. Generator's/Offeror's Certifications
1. The generator must read, sign, and date the waste minimization
certification statement. In signing the waste minimization certification
statement, those generators who have not been exempted by statute or
regulation from the duty to make a waste minimization certification
under section 3002(b) of RCRA are also certifying that they have
complied with the waste minimization requirements. The Generator's
Certification
[[Page 246]]
also contains the required attestation that the shipment has been
properly prepared and is in proper condition for transportation (the
shipper's certification). The content of the shipper's certification
statement is as follows: ``I hereby declare that the contents of this
consignment are fully and accurately described above by the proper
shipping name, and are classified, packaged, marked, and labeled/
placarded, and are in all respects in proper condition for transport by
highway according to applicable international and national governmental
regulations. If export shipment and I am the Primary Exporter, I certify
that the contents of this consignment conform to the terms of the
attached EPA Acknowledgment of Consent.'' When a party other than the
generator prepares the shipment for transportation, this party may also
sign the shipper's certification statement as the offeror of the
shipment.
2. Generator or Offeror personnel may preprint the words, ``On
behalf of'' in the signature block or may hand write this statement in
the signature block prior to signing the generator/offeror
certification, to indicate that the individual signs as the employee or
agent of the named principal.
Note: All of the above information except the handwritten signature
required in Item 15 may be pre-printed.
II. Instructions for International Shipment Block
Item 16. International Shipments
For export shipments, the primary exporter must check the export
box, and enter the point of exit (city and state) from the United
States. For import shipments, the importer must check the import box and
enter the point of entry (city and state) into the United States. For
exports, the transporter must sign and date the manifest to indicate the
day the shipment left the United States. Transporters of hazardous waste
shipments must deliver a copy of the manifest to the U.S. Customs when
exporting the waste across U.S. borders.
III. Instructions for Transporters
Item 17. Transporters' Acknowledgments of Receipt
Enter the name of the person accepting the waste on behalf of the
first transporter. That person must acknowledge acceptance of the waste
described on the manifest by signing and entering the date of receipt.
Only one signature per transportation company is required. Signatures
are not required to track the movement of wastes in and out of transfer
facilities, unless there is a change of custody between transporters.
If applicable, enter the name of the person accepting the waste on
behalf of the second transporter. That person must acknowledge
acceptance of the waste described on the manifest by signing and
entering the date of receipt.
Note: Transporters carrying imports, who are acting as importers,
may have responsibilities to enter information in the International
Shipments Block. Transporters carrying exports may also have
responsibilities to enter information in the International Shipments
Block. See above instructions for Item 16.
IV. Instructions for Owners and Operators of Treatment, Storage, and
Disposal Facilities
Item 18. Discrepancy
Item 18a. Discrepancy Indication Space
1. The authorized representative of the designated (or alternate)
facility's owner or operator must note in this space any discrepancies
between the waste described on the Manifest and the waste actually
received at the facility. Manifest discrepancies are: significant
differences (as defined by Sec. Sec. 264.72(b) and 265.72(b)) between
the quantity or type of hazardous waste designated on the manifest or
shipping paper, and the quantity and type of hazardous waste a facility
actually receives, rejected wastes, which may be a full or partial
shipment of hazardous waste that the TSDF cannot accept, or container
residues, which are residues that exceed the quantity limits for
``empty'' containers set forth in 40 CFR 261.7(b).
2. For rejected loads and residues (40 CFR 264.72(d), (e), and (f),
or 40 CFR 265.72(d), (e), or (f)), check the appropriate box if the
shipment is a rejected load (i.e., rejected by the designated and/or
alternate facility and is sent to an alternate facility or returned to
the generator) or a regulated residue that cannot be removed from a
container. Enter the reason for the rejection or the inability to remove
the residue and a description of the waste. Also, reference the manifest
tracking number for any additional manifests being used to track the
rejected waste or residue shipment on the original manifest. Indicate
the original manifest tracking number in Item 14, the Special Handling
Block and Additional Information Block of the additional manifests.
3. Owners or operators of facilities located in unauthorized States
(i.e., states in which the U.S. EPA administers the hazardous waste
management program) who cannot resolve significant differences in
quantity or type within 15 days of receiving the waste must submit to
their Regional Administrator a letter with a copy of the Manifest at
issue describing the discrepancy and attempts to reconcile it (40 CFR
264.72(c) and 265.72(c)).
4. Owners or operators of facilities located in authorized States
(i.e., those States that
[[Page 247]]
have received authorization from the U.S. EPA to administer the
hazardous waste management program) should contact their State agency
for information on where to report discrepancies involving ``significant
differences'' to state officials.
Item 18b. Alternate Facility (or Generator) for Receipt of Full Load
Rejections
Enter the name, address, phone number, and EPA Identification Number
of the Alternate Facility which the rejecting TSDF has designated, after
consulting with the generator, to receive a fully rejected waste
shipment. In the event that a fully rejected shipment is being returned
to the generator, the rejecting TSDF may enter the generator's site
information in this space. This field is not to be used to forward
partially rejected loads or residue waste shipments.
Item 18c. Alternate Facility (or Generator) Signature
The authorized representative of the alternate facility (or the
generator in the event of a returned shipment) must sign and date this
field of the form to acknowledge receipt of the fully rejected wastes or
residues identified by the initial TSDF.
Item 19. Hazardous Waste Report Management Method Codes
Enter the most appropriate Hazardous Waste Report Management Method
code for each waste listed in Item 9. The Hazardous Waste Report
Management Method code is to be entered by the first treatment, storage,
or disposal facility (TSDF) that receives the waste and is the code that
best describes the way in which the waste is to be managed when received
by the TSDF.
Item 20. Designated Facility Owner or Operator Certification of Receipt
(Except As Noted in Item 18a)
Enter the name of the person receiving the waste on behalf of the
owner or operator of the facility. That person must acknowledge receipt
or rejection of the waste described on the Manifest by signing and
entering the date of receipt or rejection where indicated. Since the
Facility Certification acknowledges receipt of the waste except as noted
in the Discrepancy Space in Item 18a, the certification should be signed
for both waste receipt and waste rejection, with the rejection being
noted and described in the space provided in Item 18a. Fully rejected
wastes may be forwarded or returned using Item 18b after consultation
with the generator. Enter the name of the person accepting the waste on
behalf of the owner or operator of the alternate facility or the
original generator. That person must acknowledge receipt or rejection of
the waste described on the Manifest by signing and entering the date
they received or rejected the waste in Item 18c. Partially rejected
wastes and residues must be re-shipped under a new manifest, to be
initiated and signed by the rejecting TSDF as offeror of the shipment.
Manifest Continuation Sheet
[[Page 248]]
[GRAPHIC] [TIFF OMITTED] TR16JN05.013
Instructions--Continuation Sheet, U.S. EPA Form 8700-22A
Read all instructions before completing this form. This form has
been designed for use on a 12-pitch (elite) typewriter; a firm point pen
may also be used--press down hard.
This form must be used as a continuation sheet to U.S. EPA Form
8700-22 if:
More than two transporters are to be used to
transport the waste; or
More space is required for the U.S. DOT
descriptions and related information in Item 9 of U.S. EPA Form 8700-22.
Federal regulations require generators and transporters of hazardous
waste and owners or operators of hazardous waste treatment,
[[Page 249]]
storage, or disposal facilities to use the uniform hazardous waste
manifest (EPA Form 8700-22) and, if necessary, this continuation sheet
(EPA Form 8700-22A) for both interstate and intrastate transportation.
Item 21. Generator's ID Number
Enter the generator's U.S. EPA twelve digit identification number
or, the State generator identification number if the generator site does
not have an EPA identification number.
Item 22. Page ----
Enter the page number of this Continuation Sheet.
Item 23. Manifest Tracking Number
Enter the Manifest Tracking number from Item 4 of the Manifest form
to which this continuation sheet is attached.
Item 24. Generator's Name--
Enter the generator's name as it appears in Item 5 on the first page
of the Manifest.
Item 25. Transporter--Company Name
If additional transporters are used to transport the waste described
on this Manifest, enter the company name of each additional transporter
in the order in which they will transport the waste. Enter after the
word ``Transporter'' the order of the transporter. For example,
Transporter 3 Company Name. Also enter the U.S. EPA twelve digit
identification number of the transporter described in Item 25.
Item 26. Transporter--Company Name
If additional transporters are used to transport the waste described
on this Manifest, enter the company name of each additional transporter
in the order in which they will transport the waste. Enter after the
word ``Transporter'' the order of the transporter. For example,
Transporter 4 Company Name. Each Continuation Sheet can record the names
of two additional transporters. Also enter the U.S. EPA twelve digit
identification number of the transporter named in Item 26.
Item 27. U.S. D.O.T. Description Including Proper Shipping Name,
Hazardous Class, and ID Number (UN/NA)
For each row enter a sequential number under Item 27b that
corresponds to the order of waste codes from one continuation sheet to
the next, to reflect the total number of wastes being shipped. Refer to
instructions for Item 9 of the manifest for the information to be
entered.
Item 28. Containers (No. And Type)
Refer to the instructions for Item 10 of the manifest for
information to be entered.
Item 29. Total Quantity
Refer to the instructions for Item 11 of the manifest form.
Item 30. Units of Measure (Weight/Volume)
Refer to the instructions for Item 12 of the manifest form.
Item 31. Waste Codes
Refer to the instructions for Item 13 of the manifest form.
Item 32. Special Handling Instructions and Additional Information
Refer to the instructions for Item 14 of the manifest form.
Transporters
Item 33. Transporter--Acknowledgment of Receipt of Materials
Enter the same number of the Transporter as identified in Item 25.
Enter also the name of the person accepting the waste on behalf of the
Transporter (Company Name) identified in Item 25. That person must
acknowledge acceptance of the waste described on the Manifest by signing
and entering the date of receipt.
Item 34. Transporter--Acknowledgment of Receipt of Materials
Enter the same number of the Transporter as identified in Item 26.
Enter also the name of the person accepting the waste on behalf of the
Transporter (Company Name) identified in Item 26. That person must
acknowledge acceptance of the waste described on the Manifest by signing
and entering the date of receipt.
Owner and Operators of Treatment, Storage, or Disposal Facilities
Item 35. Discrepancy Indication Space
Refer to Item 18. This space may be used to more fully describe
information on discrepancies identified in Item 18a of the manifest
form.
Item 36. Hazardous Waste Report Management Method Codes
For each field here, enter the sequential number that corresponds to
the waste materials described under Item 27, and enter the appropriate
process code that describes how the materials will be processed when
received. If additional continuation sheets are attached, continue
numbering the waste materials and process code fields sequentially, and
enter on each sheet the process codes
[[Page 250]]
corresponding to the waste materials identified on that sheet.
[45 FR 33142, May 19, 1980, as amended at 70 FR 10818, Mar. 4, 2005]