[Code of Federal Regulations]
[Title 40, Volume 29]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR425.42]

[Page 13]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 425_LEATHER TANNING AND FINISHING POINT SOURCE CATEGORY
--Table of Contents
 
              Subpart D_Retan-Wet Finish-Sides Subcategory
 
Sec. 425.42  Effluent limitations representing the degree of effluent reduction 
attainable by the application of the best conventional pollutant control 

          technology (BCT).

    Except as provided in 40 CFR 125.30 through 125.32, any existing 
point source subject to this subpart must achieve the following effluent 
limitations representing the degree of effluent reduction attainable by 
the application of the best conventional pollutant control technology 
(BCT): The effluent limitations are those for BOD5, TSS, Oil 
and Grease, and pH contained in Sec. 425.41.