[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR426.52] [Page 33-34] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 426_GLASS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart E_Float Glass Manufacturing Subcategory Sec. 426.52 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in Sec. Sec. 125.30 through 125.32, any existing point source subject to this subpart shall [[Page 34]] achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed-- ------------------------------------------------------------------------ Metric units (q/kkg of product) ----------------------------- TSS....................................... 2.00 2.00 Oil....................................... 1.40 1.40 Phosphorus................................ 0.05 .05 pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ton of product) ----------------------------- TSS....................................... 0.0040 0.0040 Oil....................................... 0.0028 .0028 Phosphorus................................ 0.0001 .0001 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0. [39 FR 5714, Feb. 14, 1974, as amended at 60 FR 33958, June 29, 1995]