[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR426.55] [Page 34] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 426_GLASS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart E_Float Glass Manufacturing Subcategory Sec. 426.55 Standards of performance for new sources. The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed-- ------------------------------------------------------------------------ Metric units (g/kkg of product) ----------------------------- TSS....................................... 0.70 0.70 Oil....................................... 1.40 1 .40 Phosphorus................................ 0.05 .05 pH........................................ (\1\) (\1\) ----------------------------- English units (lb/ton of product) ----------------------------- TSS....................................... 0.0014 0.0014 Oil....................................... 0.0028 .0028 Phosphorus................................ 0.0001 .0001 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0.