[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR426.65] [Page 35-36] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 426_GLASS MANUFACTURING POINT SOURCE CATEGORY--Table of Contents Subpart F_Automotive Glass Tempering Subcategory Sec. 426.65 Standards of performance for new sources. The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: [[Page 36]] ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed-- ------------------------------------------------------------------------ Metric units (q/sq m of product) ----------------------------- TSS....................................... 0.24 0.24 Oil....................................... 0.49 .49 pH........................................ (\1\) (\1\) ----------------------------- English units (lb/1,000 sq ft of product) ----------------------------- TSS....................................... 0.05 0.05 Oil....................................... 0.10 .10 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0.