[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR428.92] [Page 77] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 428_RUBBER MANUFACTURING POINT SOURCE CATEGORY --Table of Contents Subpart I_Pan, Dry Digestion, and Mechanical Reclaimed Rubber Subcategory Sec. 428.92 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in Sec. Sec. 125.30 through 125.32, any existing point source subject to this subpart shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties controlled by this section, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available: ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed-- ------------------------------------------------------------------------ Metric units (kg/kkg of product) ----------------------------- Oil and grease............................ 0.40 0.144 TSS....................................... 0.384 0.192 pH........................................ (\1\) (\1\) ----------------------------- English units (lb/1,000 lb of product) ----------------------------- Oil and grease............................ 0.40 0.144 TSS....................................... 0.384 0.192 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0. (b) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this section and attributable to pan, dry digestion, and mechanical reclaimed rubber processes which are integrated with a wet digestion reclaimed process, which may be discharged by a point source subject to the provisions of this subpart after application of the best practicable control technology currently available, in addition to the limitations set forth by Sec. 428.92(a): ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed-- ------------------------------------------------------------------------ Metric units (kg/kkg of product) ----------------------------- COD....................................... 6.7 2.8 ----------------------------- English units (lb/1,000 lb of product) ----------------------------- COD....................................... 6.7 2.8 ------------------------------------------------------------------------ [40 FR 2342, Jan. 10, 1975, as amended at 60 FR 33964, June 29, 1995] [[Page 78]]