[Code of Federal Regulations]
[Title 40, Volume 29]
[Revised as of July 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR455.32]

[Page 474-475]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 455_PESTICIDE CHEMICALS--Table of Contents
 
 Subpart B_Metallo-Organic Pesticide Chemicals Manufacturing Subcategory
 
Sec. 455.32  Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control 
          technology currently available.

    Except as provided in Sec. Sec. 125.30 through 125.32, any existing 
point source subject to this subpart, shall

[[Page 475]]

achieve the following effluent limitations representing the degree of 
effluent reduction attainable by the application of the best practicable 
control technology currently available (BPT). The following limitations 
establish the quantity or quality of pollutants or pollutant properties 
controlled by this paragraph which may be discharged from the 
manufacture of metallo-organic active ingredient: There shall be no 
discharge of process waste water pollutants to navigable waters.

[60 FR 33971, June 29, 1995]