[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR457.12] [Page 505-506] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 457_EXPLOSIVES MANUFACTURING POINT SOURCE CATEGORY --Table of Contents Subpart A_Manufacture of Explosives Subcategory Sec. 457.12 Effluent limitations and guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available. Except as provided in Sec. Sec. 125.30 through 125.32, any existing point source subject to this subpart, shall achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available (BPT): (a) The following limitations establish the quantity or quality of pollutants or pollutant properties, controlled by this paragraph, which may be discharged from the manufacture of explosives by a point source subject to [[Page 506]] the provisions of this paragraph after application of the best practical control technology currently available: [Metric units, kg/kkg of product; English units, lb/1,000 lb of product] ------------------------------------------------------------------------ Effluent limitations ----------------------------- Average of daily Effluent characteristic Maximum values for 30 for any 1 consecutive days day shall not exceed-- ------------------------------------------------------------------------ COD....................................... 7.77 2.59 BOD5...................................... 0.72 0.24 TSS....................................... 0.25 0.084 pH........................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range 6.0 to 9.0. [41 FR 10184, Mar. 9, 1976, as amended at 60 FR 33971, June 29, 1995] Subpart B [Reserved]