[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR468.13] [Page 663-667] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 468_COPPER FORMING POINT SOURCE CATEGORY--Table of Contents Subpart A_Copper Forming Subcategory Sec. 468.13 New source performance standards (NSPS). The following standards of performance establish the quantity or quality of pollutants or pollutant properties, controlled by this section, which may be discharged by a new source subject to the provisions of this subpart: (a) Subpart A--Hot Rolling Spent Lubricant NSPS. [[Page 664]] ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy hot rolled English units--pounds per 1,000,000 off-pounds of copper or copper alloy hot rolled -------------------------- Chromium..................................... 0.038 0.015 Copper....................................... 0.131 0.062 Lead......................................... 0.010 0.0092 Nickel....................................... 0.056 0.038 Zinc......................................... 0.105 0.043 Oil and grease............................... 1.030 1.030 TSS.......................................... 1.545 1.236 pH........................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (b) Subpart A--Cold Rolling Spent Lubricant NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy cold rolled English units--pounds per 1,000,000 off-pounds of copper or copper alloy cold rolled ------------------------- Chromium...................................... 0.140 0.056 Copper........................................ 0.485 0.231 Lead.......................................... 0.037 0.034 Nickel........................................ 0.208 0.140 Zinc.......................................... 0.386 0.159 Oil and grease................................ 3.790 3.790 TSS........................................... 5.685 4.548 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (c) Subpart A--Drawing Spent Lubricant NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy drawn English units--pounds per 1,000,000 off-pounds of copper or copper alloy drawn --------------------------- Chromium.................................... 0.031 0.012 Copper...................................... 0.108 0.051 Lead........................................ 0.0085 0.0076 Nickel...................................... 0.046 0.031 Zinc........................................ 0.086 0.035 Oil and grease.............................. 0.85 0.85 TSS......................................... 1.275 1.020 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (d) Subpart A--Solution Heat Treatment NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy drawn English units--pounds per 1,000,000 off-pounds of copper or copper alloy heat treated ------------------------- Chromium...................................... 0.239 0.096 Copper........................................ 0.826 0.394 Lead.......................................... 0.064 0.058 Nickel........................................ 0.355 0.239 Zinc.......................................... 0.658 0.271 Oil and grease................................ 6.460 6.460 TSS........................................... 9.690 7.752 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (e) Subpart A--Extrusion Heat Treatment NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy heat treated on an extrusion press English units--pounds per 1,000,000 off-pounds of copper or copper alloy heat treated on and extrusion press --------------------------- Chromium.................................... 0.00074 0.00030 Copper...................................... 0.0020 0.0010 Lead........................................ 0.00020 0.00018 Nickel...................................... 0.0010 0.00074 Zinc........................................ 0.0020 0.00084 Oil and grease.............................. 0.020 0.020 TSS......................................... 0.030 0.024 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (f) Subpart A--Annealing with Water NSPS. [[Page 665]] ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy annealed with water English units--pounds per 1,000,000 off-pounds of copper or copper alloy annealed with water --------------------------- Chromium.................................... 0.458 0.186 Copper...................................... 1.587 0.756 Lead........................................ 0.124 0.111 Nickel...................................... 0.682 0.458 Zinc........................................ 1.264 0.520 Oil and grease.............................. 12.400 12.400 TSS......................................... 18.600 14.880 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (g) Subpart A--Annealing with Oil NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy annealed with oil English units--pounds per 1,000,000 off-pounds of copper or copper alloy annealed with oil ------------------------- Chromium...................................... 0 0 Copper........................................ 0 0 Lead.......................................... 0 0 Nickel........................................ 0 0 Zinc.......................................... 0 0 Oil and grease................................ 0 0 TSS........................................... 0 0 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (h) Subpart A--Alkaline Cleaning Rinse NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy alkaline cleaned English units--pounds per 1,000,000 off-pounds of copper or copper alloy alkaline cleaned ------------------------- Chromium...................................... 1.559 0.632 Copper........................................ 5.393 2.570 Lead.......................................... 0.421 0.379 Nickel........................................ 2.317 1.559 Zinc.......................................... 4.298 1.769 Oil and grease................................ 42.140 42.140 TSS........................................... 63.210 50.568 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (i) Subpart A--Alkaline Cleaning Rinse for Forged Parts NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy forged parts alkaline cleaned English units--pounds per 1,000,000 off-pounds of copper or copper alloy forged parts alkaline cleaned ------------------------- Chromium...................................... 4.677 1.896 Copper........................................ 16.181 7.711 Lead.......................................... 1.264 1.137 Nickel........................................ 6.953 4.677 Zinc.......................................... 12.894 5.309 Oil and grease................................ 126.420 126.420 TSS........................................... 189.630 151.704 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ 1 Within the range of 7.5 to 10.0 at all times. (j) Subpart A--Alkaline Cleaning Bath NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy alkaline cleaned English units--pounds per 1,000,000 off-pounds of copper or copper alloy alkaline cleaned --------------------------- Chromium.................................... 0.017 0.0070 Copper...................................... 0.059 0.028 Lead........................................ 0.0046 0.0042 Nickel...................................... 0.025 0.017 Zinc........................................ 0.047 0.019 Oil and grease.............................. 0.46 0.46 TSS......................................... 0.70 0.56 pH.......................................... (\1\) (\1\) ------------------------------------------------------------------------ 1 Within the range of 7.5 to 10.0 at all times. (k) Subpart A--Pickling Rinse NSPS. [[Page 666]] ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy pickled English units--pounds per/1,000,000 off-pounds of copper or copper alloy pickled ------------------------- Chromium...................................... 0.216 0.087 Copper........................................ 0.748 0.356 Lead.......................................... 0.058 0.052 Nickel........................................ 0.321 0.216 Zinc.......................................... 0.596 0.245 Oil and grease................................ 5.850 5.850 TSS........................................... 8.775 7.020 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (l) Subpart A--Pickling Rinse for Forged Parts NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy forged parts pickled English units--pounds per/1,000,000 off-pounds of copper or copper alloy forged parts pickled ------------------------- Chromium...................................... 0.649 0.263 Copper........................................ 2.246 1.070 Lead.......................................... 0.175 0.157 Nickel........................................ 0.965 0.649 Zinc.......................................... 1.790 0.737 Oil and grease................................ 17.550 17.550 TSS........................................... 26.325 21.060 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (m) Subpart A--Pickling Bath NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy pickled English units--pounds per 1,000,000 off-pounds of copper or copper alloy pickled ------------------------- Chromium...................................... 0.042 0.017 Copper........................................ 0.148 0.070 Lead.......................................... 0.011 0.010 Nickel........................................ 0.063 0.042 Zinc.......................................... 0.118 0.048 Oil and grease................................ 1.160 1.160 TSS........................................... 1.740 1.392 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (n) Subpart A--Pickling Fume Scrubber NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy pickled. English units-pounds per 1,000,000 off-pounds of copper or copper alloy pickled ------------------------- Chromium...................................... 0.231 0.093 Copper........................................ 0.801 0.381 Lead.......................................... 0.062 0.056 Nickel........................................ 0.344 0.231 Zinc.......................................... 0.638 0.262 Oil and grease................................ 6.260 6.260 TSS........................................... 9.390 7.512 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (o) Subpart A--Tumbling or Burnishing NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper tumbled or burnished English units--pounds per 1,000,000 off-pounds of copper or copper alloy tumbled or burnished ------------------------- Chromium...................................... 0.215 0.087 Copper........................................ 0.746 0.355 Lead.......................................... 0.058 0.052 Nickel........................................ 0.320 0.215 Zinc.......................................... 0.594 0.244 Oil and grease................................ 5.830 5.830 TSS........................................... 8.745 6.996 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (p) Subpart A--Surface Coating NSPS. [[Page 667]] ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy surface coated English units--pounds per 1,000,000 off-pounds of copper or copper alloy surface coated ------------------------- Chromium...................................... 0.274 0.111 Copper........................................ 0.951 0.453 Lead.......................................... 0.074 0.066 Nickel........................................ 0.408 0.274 Zinc.......................................... 0.757 0.312 Oil and grease................................ 7.430 7.430 TSS........................................... 11.145 8.916 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ \1\ Within the range of 7.5 to 10.0 at all times. (q) Subpart A--Miscellaneous Waste Streams NSPS. ------------------------------------------------------------------------ Maximum for Pollutant or pollutant property Maximum for monthly any 1 day average ------------------------------------------------------------------------ Metric units--mg/off-kg of copper or copper alloy formed English units--pounds/ 1,000,000 off-pounds of copper or copper alloy formed ------------------------- Chromium...................................... 0.008 0.003 Copper........................................ 0.027 0.013 Lead.......................................... 0.0021 0.0019 Nickel........................................ 0.011 0.008 Zinc.......................................... 0.022 0.009 Oil and grease................................ 0.218 0.218 TSS........................................... 0.327 0.261 pH............................................ (\1\) (\1\) ------------------------------------------------------------------------ Within the range of 7.5 to 10.0 at all times. [48 FR 36957, Aug. 15, 1983; 48 FR 50718, Nov. 3, 1983]