[Code of Federal Regulations] [Title 40, Volume 29] [Revised as of July 1, 2007] From the U.S. Government Printing Office via GPO Access [CITE: 40CFR600.011-93] [Page 884-885] TITLE 40--PROTECTION OF ENVIRONMENT CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) PART 600_FUEL ECONOMY OF MOTOR VEHICLES--Table of Contents Subpart A_Fuel Economy Regulations for 1977 and Later Model Year Automobiles_General Provisions Sec. 600.011-93 Reference materials. (a) Incorporation by reference. The documents in paragraph (b) of this section have been incorporated by reference. The incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies may be inspected at USEPA, OAR, 1200 Pennsylvania Ave., NW., Washington, DC 20460, or at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202- 741-6030, or go to: http://www.archives.gov/federal--register/code--of-- federal--regulations/ibr--locations.html. (b) The following paragraphs and tables set forth the material that has been incorporated by reference in this part. (1) ASTM material. The following table sets forth material from the American Society for Testing and Materials which has been incorporated by reference. The first column lists the number and name of the material. The second column lists the section(s) of this part, other than Sec. 600.011, in which the matter is referenced. Copies of these materials may be obtained from American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103. ------------------------------------------------------------------------ Document number and name 40 CFR part 600 reference ------------------------------------------------------------------------ ASTM E 29-67 (Reapproved 1973) Standard 600.002-93, 600.002-08. Recommended Practice for Indicating Which Places of Figures Are To Be Considered Significant in Specified Limiting Values. [[Page 885]] ASTM D 1298-85 (Reapproved 1990) Standard 600.113-93, 600.510-93, Practice for Density, Relative Density 600.113-08, 600.510- 08. (Specific Gravity), or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method. ASTM D 3343-90 Standard Test Method for 600.113-93, 600.113-08. Estimation of Hydrogen Content of Aviation Fuels. ASTM D 3338-92 Standard Test Method for 600.113-93, 600.113-08. Estimation of Net Heat of Combustion of Aviation Fuels. ASTM D 240-92 Standard Test Method for 600.113-93, 600.510-93, Heat of Combustion of Liquid Hydrocarbon 600.113-08, 600.510-08. Fuels by Bomb Calorimeter. ASTM D975-04c ``Standard Specification 600.107-08. for Diesel Fuel Oils'' ASTM D 1945-91 Standard Test Method for 600.113-93, 600.113-08. Analysis of Natural Gas By Gas Chromatography.. ------------------------------------------------------------------------ (2) [Reserved] [59 FR 39652, Aug. 3, 1994, as amended at 69 FR 18803, Apr. 9, 2004; 71 FR 77933, Dec. 27, 2006]