[Code of Federal Regulations]
[Title 40, Volume 15]
[Revised as of January 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 40CFR68.160]

[Page 185-186]
 
                   TITLE 40--PROTECTION OF ENVIRONMENT
 
         CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY (CONTINUED)
 
PART 68_CHEMICAL ACCIDENT PREVENTION PROVISIONS--Table of Contents
 
                     Subpart G_Risk Management Plan
 
Sec.  68.160  Registration.

    (a) The owner or operator shall complete a single registration form 
and include it in the RMP. The form shall cover all regulated substances 
handled in covered processes.
    (b) The registration shall include the following data:
    (1) Stationary source name, street, city, county, state, zip code, 
latitude and longitude, method for obtaining latitude and longitude, and 
description of location that latitude and longitude represent;
    (2) The stationary source Dun and Bradstreet number;
    (3) Name and Dun and Bradstreet number of the corporate parent 
company;
    (4) The name, telephone number, and mailing address of the owner or 
operator;
    (5) The name and title of the person or position with overall 
responsibility for RMP elements and implementation, and (optional) the 
e-mail address for that person or position;
    (6) The name, title, telephone number, 24-hour telephone number, 
and, as of June 21, 2004, the e-mail address (if an e-mail address 
exists) of the emergency contact;
    (7) For each covered process, the name and CAS number of each 
regulated substance held above the threshold quantity in the process, 
the maximum quantity of each regulated substance or mixture in the 
process (in pounds) to two significant digits, the five- or six-digit 
NAICS code that most closely corresponds to the process, and the Program 
level of the process;
    (8) The stationary source EPA identifier;
    (9) The number of full-time employees at the stationary source;

[[Page 186]]

    (10) Whether the stationary source is subject to 29 CFR 1910.119;
    (11) Whether the stationary source is subject to 40 CFR part 355;
    (12) If the stationary source has a CAA Title V operating permit, 
the permit number; and
    (13) The date of the last safety inspection of the stationary source 
by a Federal, state, or local government agency and the identity of the 
inspecting entity.
    (14) As of June 21, 2004, the name, the mailing address, and the 
telephone number of the contractor who prepared the RMP (if any);
    (15) Source or Parent Company E-Mail Address (Optional);
    (16) Source Homepage address (Optional)
    (17) Phone number at the source for public inquiries (Optional);
    (18) Local Emergency Planning Committee (Optional);
    (19) OSHA Voluntary Protection Program status (Optional);
    (20) As of June 21, 2004, the type of and reason for any changes 
being made to a previously submitted RMP; the types of changes to RMP 
are categorized as follows:
    (i) Updates and re-submissions required under Sec.  68.190(b);
    (ii) Corrections under Sec.  68.195 or for purposes of correcting 
minor clerical errors, updating administrative information, providing 
missing data elements or reflecting facility ownership changes, and 
which do not require an update and re-submission as specified in Sec.  
68.190(b);
    (iii) De-registrations required under Sec.  68.190(c); and
    (iv) Withdrawals of an RMP for any facility that was erroneously 
considered subject to this part 68.

[61 FR 31726, June 20, 1996, as amended at 64 FR 980, Jan. 6, 1999; 69 
FR 18831, Apr. 9, 2004]