[Code of Federal Regulations]
[Title 46, Volume 1]
[Revised as of January 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 46CFR39.10-5]

[Page 510-511]
 
                           TITLE 46--SHIPPING
 
         CHAPTER I--COAST GUARD, DEPARTMENT OF HOMELAND SECURITY
 
PART 39_VAPOR CONTROL SYSTEMS--Table of Contents
 
                          Subpart 39.10_General
 
Sec. 39.10-5  Incorporation by reference--TB/ALL.

    (a) Certain materials are incorporated by reference into this part 
with the approval of the Director of the Federal Register in accordance 
with 5 U.S.C. 552(a). To enforce any edition other than the one listed 
in paragraph (b) of this section, notice of change must be published in 
the Federal Register and the material made available to the public. All 
approved material is on file at the U.S. Coast Guard, Office of 
Operating and Environmental Standards (G-MSO), 2100 Second Street, SW., 
Washington, DC 20593-0001, or at the National Archives and Records 
Administration (NARA). For information on the availability of this 
material at NARA, call 202-741-6030, or go to: http://www.archives.gov/
federal--register/code--of--federal--regulations/ibr--locations.html. 
All material is available from the sources indicated in paragraph (b) of 
this section.
    (b) The material approved for incorporation by reference in this 
part, and the sections affected are:

American Petroleum Institute (API), 1220 L Street NW.,
 Washington, DC 20005
    API Standard 2000, Venting Atmospheric and Low-Pressure     39.20-11
     Storage Tanks (Nonrefrigerated and Refrigerated), Third
     Edition, January 1982 (reaffirmed December 1987).......
American National Standards Institute (ANSI), 11 West 42nd
 Street, New York, NY 10036
    ANSI B16.5, Steel Pipe Flanges and Flanged Fittings,         39.20-1
     1981...................................................
American Society for Testing and Materials (ASTM), 100 Barr
 Harbor Drive, West Conshohocken, PA 19428-2959
    ASTM F 1271-90 (1995)--Standard Specification for Spill      39.20-9
     Valves for Use in Marine Tank Liquid Overpressure
     Protection Applications................................
International Electrotechnical Commission (IEC), Bureau
 Central de la Commission Electrotechnique Internationale, 1
 rue de Varemb[eacute], Geneva, Switzerland
    IEC 309-1--Plugs, Socket-Outlets and Couplers for            39.20-9
     Industrial Purposes: Part 1, General Requirements, 1979
    IEC 309-2--Plugs, Socket-Outlets and Couplers for            39.20-9
     Industrial Purposes: Part 2, Dimensional
     Interchangeability Requirements for Pin and Contact-
     tube Accessories, 1981.................................
National Electrical Manufacturers Association (NEMA), 2101 L
 St. NW., Washington, DC 20036
    ANSI/NEMA WD6--Wiring Devices, Dimensional Requirements,     39.20-9
     1988...................................................
National Fire Protection Association (NFPA), 1 Batterymarch
 Park, Quincy, MA 02269
    NFPA 70--National Electrical Code, 1987.................     39.20-9
Oil Companies International Marine Forum (OCIMF), 15th
 Floor, 96 Victoria Street, London SWIE 5JW, England
    International Safety Guide for Oil Tankers and               39.30-1
     Terminals, Third Edition, 1988.........................
 


[[Page 511]]


[CGD 88-102, 55 FR 25446, June 21, 1990, as amended by CGD 95-072, 60 FR 
50462, Sept. 29, 1995; CGD 96-041, 61 FR 50727, Sept. 27, 1996; CGD 97-
057, 62 FR 51043, Sept. 30, 1997; USCG-1999-5151, 64 FR 67177, Dec. 1, 
1999]