[Code of Federal Regulations]
[Title 48, Volume 5]
[Revised as of October 1, 2007]
From the U.S. Government Printing Office via GPO Access
[CITE: 48CFR852.236-71]

[Page 245]
 
            TITLE 48--FEDERAL ACQUISITION REGULATIONS SYSTEM
 
                CHAPTER 8--DEPARTMENT OF VETERANS AFFAIRS
 
Sec. 852.236-71  Specifications and drawings for construction.

    As prescribed in 836.521, insert the following clause:

         Specifications and Drawings for Construction (JUL 2002)

    The clause entitled ``Specifications and Drawings for Construction'' 
in FAR 52.236-21 is supplemented as follows:
    (a) The contracting officer's interpretation of the drawings and 
specifications will be final, subject to the disputes clause.
    (b) Large scale drawings supersede small scale drawings.
    (c) Dimensions govern in all cases. Scaling of drawings may be done 
only for general location and general size of items.
    (d) Dimensions shown of existing work and all dimensions required 
for work that is to connect with existing work shall be verified by the 
contractor by actual measurement of the existing work. Any work at 
variance with that specified or shown in the drawings shall not be 
performed by the contractor until approved in writing by the contracting 
officer.

                             (End of clause)

[49 FR 12629, Mar. 29, 1984, as amended at 50 FR 794, Jan. 7, 1985; 67 
FR 49260, July 30, 2002]